[ipv6-wg] Last Call (20101117): Requirements For IPv6 in ICT Equipment
- Previous message (by thread): [ipv6-wg] Last Call (20101117): Requirements For IPv6 in ICT Equipment
- Next message (by thread): [ipv6-wg] Last Call (20101117): Requirements For IPv6 in ICT Equipment
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Jan Zorz @ go6.si
jan at go6.si
Wed Nov 10 14:22:06 CET 2010
On 10.11.10 9:08, Ivan Pepelnjak wrote: > Dear all, > > As I'm one of the original authors of this document (now nicely hidden behind > the "Slovenian IPv6 working group" blob ;) ;) > * If MPLS functionality (for example, BGP-free core, MPLS TE, MPLS FRR) is > requested, the PE-routers and route reflectors MUST support "Connecting IPv6 > Islands over IPv4 MPLS Using IPv6 Provider Edge Routers (6PE)" [RFC 4798] Agree. > > * If layer-3 VPN functionality is requested, the PE-routers and route > reflectors MUST support "BGP-MPLS IP Virtual Private Network (VPN) Extension > for IPv6 VPN" [RFC 4659] Agree. > The "Router or Layer 3 switch" equipment section thus needs two more items: > > MANDATORY --------- * If MPLS Traffic Engineering is used in combination with > IS-IS routing protocol, the equipment MUST support "M-ISIS: Multi Topology > (MT) Routing in Intermediate System to Intermediate Systems (IS-ISs)" [RFC > 5120] > > OPTIONAL -------- * When IS-IS routing protocol is requested, the equipment > SHOULD support "M-ISIS: Multi Topology (MT) Routing in Intermediate System to > Intermediate Systems (IS-ISs)" [RFC 5120] (this support is highly > recommended) What can I say? Agree :) You are the MPLS man (as you wrote a Cisco book about that), so I trust you with this :) Cheers, /jan
- Previous message (by thread): [ipv6-wg] Last Call (20101117): Requirements For IPv6 in ICT Equipment
- Next message (by thread): [ipv6-wg] Last Call (20101117): Requirements For IPv6 in ICT Equipment
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
[ ipv6-wg Archives ]