[address-policy-wg] Easy to remember IP-address

Sergey Gotsulyak wrote:

> For this project we?ll need an easy to remember IP-address, for
> example like the one for Google Public DNS service (8.8.8.8)

I'm afraid you typed wrong characters for "we'll", which is
a problem, among many, of unicode

Anyway, 4 byte addresses of IPv4 is not so bad to memorize.

You are right, however, that IPv6 addresses are impossible to
remember not only for end users but also for network operators,
which is one of a reason why IPv6 is NOT deployable.

The magic number for memory is 7. That is, one can easily remember
4 bytes and may be able to remember 8 bytes. However, it is virtually
impossible to remember 16 bytes.

That is, for fairness, IPv6 is unusable.

Instead, everyone should be able to remember 4 byte IPv4
addresses and 2 byte short port numbers as was documented in
<draft-ohta-e2e-nat-00.txt>

   When an ISP
   operate a NAT gateway, the ISP should, for fairness between
   customers, reserve some well know port numbers and assign small port
   numbers evenly to all the customers.

> We have contacted RIPE NCC with a request to get a block of addresses
> 2.2.2.0/24, but were told that the standard procedure does not allow
> us to choose an address range.
> 
> Is it possible to modify current Address Policy?

You had better to abandone IPv6 and IPv6 address policies and just
stick to IPv4 with A+P including, but not limited to,
<draft-ohta-e2e-nat-00.txt>.

						Masataka Ohta