From henk at ripe.net Thu Nov 9 12:04:50 2000 From: henk at ripe.net (Henk Uijterwaal (RIPE-NCC)) Date: Thu, 9 Nov 2000 12:04:50 +0100 (CET) Subject: Antenna space/specs In-Reply-To: Message-ID: Randy, > > where can i get the specs for the roof space and cable run requirements? > > this would be suitable for consumption by build type folk. so i need > > something approximating "3cm abs tube", drawing of the mounting pad, ... I don't have a drawing in a computer readable format (yet), but we've ordered mounting pads for our new antennas that look like: antenna | o Screw | o Screw | ---+--- Base plate The base plate is 6x10 cm, with 4 holes at the corners (approximately 0.75 cm away from each corner). The mounting pad is 14 cm high. One can loosen the screws and adjust the pad for wall mounting, like antenna | o--o--| wall You can also mount it to a pole with U-shaped brackets and nuts. The antenna is 8 cm high, 14 cm diameter. The standard cable has a special connector on one end, about 1.75 cm in diameter. The antenna cable can be extended with standard cat-5 cable. Henk ------------------------------------------------------------------------------ Henk Uijterwaal Email: henk.uijterwaal at ripe.net RIPE Network Coordination Centre WWW: http://www.ripe.net/home/henk Singel 258 Phone: +31.20.535-4414, Fax -4445 1016 AB Amsterdam Home: +31.20.4195305 The Netherlands Mobile: +31.6.55861746 ------------------------------------------------------------------------------ A man can take a train and never reach his destination. (Kerouac, well before RFC2780). From randy at psg.com Thu Nov 9 14:14:44 2000 From: randy at psg.com (Randy Bush) Date: Thu, 09 Nov 2000 05:14:44 -0800 Subject: Antenna space/specs References: Message-ID: > I don't have a drawing in a computer readable format (yet), but we've > ordered mounting pads for our new antennas that look like: > > antenna > | > o Screw > | > o Screw > | > ---+--- Base plate > > The base plate is 6x10 cm, with 4 holes at the corners (approximately 0.75 > cm away from each corner). The mounting pad is 14 cm high. One can > loosen the screws and adjust the pad for wall mounting, like > > antenna > | > o--o--| wall > > You can also mount it to a pole with U-shaped brackets and nuts. > > The antenna is 8 cm high, 14 cm diameter. > > The standard cable has a special connector on one end, about 1.75 cm in > diameter. The antenna cable can be extended with standard cat-5 cable. thank you! randy