From marco at sara.nl Wed Dec 1 12:37:28 2004 From: marco at sara.nl (Marco Davids (SARA)) Date: Wed, 01 Dec 2004 12:37:28 +0100 Subject: [ris-int] Re: [NCC#2004119411: Peering SURFnet - RIPE werkt niet (ARS S9757) (fwd)] In-Reply-To: <200411301519.iAUFJ8LE012429@birch.ripe.net> References: <200411301519.iAUFJ8LE012429@birch.ripe.net> Message-ID: <41ADACF8.1030105@sara.nl> James Aldridge wrote: > Peter Blondel wrote: > >>On Mon, 29 Nov 2004 13:19:30 +0100 >>Arife Vural wrote: >> >> >>>Hi Peter, >>> >>>It looks I missed Anchor prefix, 195.80.239.0/24. We are announcing this >>>prefix continously. That means you should get at least one prefix from us, >>>and that would be 2 when we start to announce normal Beacon prefix. >>> >>>Please, let us know if you still get no prefix from us. >>> >>>Regards. >> >> Arife, >> >>We still get nothing from you; >> sh ip bgp neighbors 193.0.4.28 received-routes >>gives no entries. > > > Hmmm.. our bgpd definitely thinks it's sending something to you: > > | rrc00> sh ip bg nei 195.69.144.34 advertised-routes > | BGP table version is 0, local router ID is 193.0.4.28 > | Status codes: s suppressed, d damped, h history, * valid, > best, i - internal > | Origin codes: i - IGP, e - EGP, ? - incomplete > | > | Network Next Hop Metric LocPrf Weight Path > | *> 195.80.239.0 193.0.4.28 0 32768 i > | > | Total number of prefixes 1 > > > James > James, We seem to filter your prefix (a deny all filter) since as long as we can remember, so that explains a lot. When I removed the filter, for testing purposed, i got: br2.amsterdam1#sh ip bgp sum | incl 193.0.4.28 193.0.4.28 4 12654 110 586723 5703865 0 0 00:00:16 1 br2.amsterdam1# Question is however; are we supposed to filter any incoming prefixes on this peering or not? I am not entirely sure and therefore I'd like to verify this with you. Thanks -- Marco Davids SARA High Performance Networking - Amsterdam Phone: +315923000 Fax: +31847452840 -------------- next part -------------- A non-text attachment was scrubbed... Name: marco.vcf Type: text/x-vcard Size: 304 bytes Desc: not available URL: From matthew at ripe.net Thu Dec 2 18:09:17 2004 From: matthew at ripe.net (Matthew Williams) Date: Thu, 2 Dec 2004 18:09:17 +0100 Subject: [ris-int] FW: What is the difference between RIPE and RadB Message-ID: <00c801c4d891$a7f4eac0$150200c1@rockstar> Already replied off-list to this one . Cheers, Matthew > -----Original Message----- > From: owner-nanog at merit.edu [mailto:owner-nanog at merit.edu] On > Behalf Of Tony Pace > Sent: 02 December 2004 17:03 > To: nanog at merit.edu > Subject: What is the difference between RIPE and RadB > > > > Is : > > - RADb the database where AS numbers are cross referenced to > IP address > prefixes > > - RIPE is an idependent project to map out the relationship > of AS's and how > their locations (relative to one and other) > > ??? > > Tony > > _________________________________________________________________ > Express yourself instantly with MSN Messenger! Download today > - it's FREE! > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ > From paul at vix.com Sat Dec 4 02:44:46 2004 From: paul at vix.com (Paul Vixie) Date: Sat, 04 Dec 2004 01:44:46 +0000 Subject: [ris-int] Re: RIPE NCC RIS box @ PAIX In-Reply-To: Message from Arife Vural of "Mon, 09 Aug 2004 15:03:34 +0200." <20040809130334.GB7922@ripe.net> Message-ID: <20041204014446.7A95713E14@sa.vix.com> ok, you're live at paix on your dell 1550's second ethernet port. your address there is 198.32.176.6. netmask is 255.255.255.0. right now the PTR for this points at WIDE; please let me know what PTR you prefer for 6.176.32.198.in-aadr.arpa, and i'll try to arrange it. re: > Date: Mon, 9 Aug 2004 15:03:34 +0200 > From: Arife Vural > To: vixie at isc.org, joao at isc.org, paul at vix.com > Cc: ris-int at ripe.net > Subject: RIPE NCC RIS box @ PAIX > User-Agent: Mutt/1.4.2.1i > X-Organization: RIPE Network Coordination Centre > X-FCOPY: arife at ripe.net > X-Phone: +31 20 535 4490 > X-Fax: +31 20 535 4445 > X-WWW: http://www.ripe.net > X-Operating-System: Linux x12 2.4.26 > X-RIPE-Spam-Level: > X-RIPE-Spam-Status: N 0.000000 / 0.0 / 0.0 / disabled > X-RIPE-Signature: 8eb633018b90ef9d380ed3af8868775b > > > Hi Joao, Paul, > > My name is Arife Vural. I'm working as Network Engineer for RIPE NCC RIS > (Routing Information Service) Project. We have remote route collectors > around the world to collect BGP routing data. > > Lately, the box we have at MAE-West is not as functional as we aimed. We > could not get enough peers there. Because of that we are looking for a new > place for RRC box on West coast. PAIX looks like a good choice for us by > looking at number of members and also network infrastructure. We are just > wondering whether you would help us to locate RIS box at PAIX. To do this, > we would need help at the beginning to install the box and do the network > connection. Other than that, we also need a transit provider to reach the > box. > > I'll be appreciated if you could get back to us whether you could help > or not about relocating the RIS box at PAIX. > > Kind regards. > Arife From arife at ripe.net Sat Dec 4 09:05:13 2004 From: arife at ripe.net (Arife Vural) Date: Sat, 4 Dec 2004 09:05:13 +0100 Subject: [ris-int] Re: RIPE NCC RIS box @ PAIX In-Reply-To: <20041204014446.7A95713E14@sa.vix.com> References: <20040809130334.GB7922@ripe.net> <20041204014446.7A95713E14@sa.vix.com> Message-ID: <20041204080513.GA12301@ripe.net> > ok, you're live at paix on your dell 1550's second ethernet port. Thanks a lot. I configured the peering LAN interface and it works. Please configure rrc14.ripe.net as PTR. BTW, can we configure a session with ISC? Regards. Arife From paul at vix.com Sat Dec 4 17:39:25 2004 From: paul at vix.com (Paul Vixie) Date: Sat, 04 Dec 2004 16:39:25 +0000 Subject: [ris-int] Re: RIPE NCC RIS box @ PAIX In-Reply-To: Message from Arife Vural of "Sat, 04 Dec 2004 09:05:13 +0100." <20041204080513.GA12301@ripe.net> Message-ID: <20041204163925.19A4F13E19@sa.vix.com> > > ok, you're live at paix on your dell 1550's second ethernet port. > > Thanks a lot. I configured the peering LAN interface and it works. Please > configure rrc14.ripe.net as PTR. i'll ask the paix people to make that change. by the way, this address was once first used by cix.net. > BTW, can we configure a session with ISC? i can only imagine that if you send mail to peering at isc.org they will say "yes". isc is very open in its peering. however, i'm not the right person, and joao's team who does this work has a process they like to follow. From arife at ripe.net Mon Dec 6 10:38:42 2004 From: arife at ripe.net (Arife Vural) Date: Mon, 6 Dec 2004 10:38:42 +0100 Subject: [ris-int] Re: RIPE NCC RIS box @ PAIX In-Reply-To: <20041204163925.19A4F13E19@sa.vix.com> References: <20041204080513.GA12301@ripe.net> <20041204163925.19A4F13E19@sa.vix.com> Message-ID: <20041206093842.GC32218@ripe.net> > i can only imagine that if you send mail to peering at isc.org they will say > "yes". isc is very open in its peering. however, i'm not the right person, > and joao's team who does this work has a process they like to follow. OK, I will send an e-mail to peering at isc.org. Thanks. Arife From paul at vix.com Fri Dec 10 02:04:23 2004 From: paul at vix.com (Paul Vixie) Date: Fri, 10 Dec 2004 01:04:23 +0000 Subject: [ris-int] Re: RIPE NCC RIS box @ PAIX In-Reply-To: Message from Arife Vural of "Sat, 04 Dec 2004 09:05:13 +0100." <20041204080513.GA12301@ripe.net> Message-ID: <20041210010423.E87DC13E12@sa.vix.com> > > ok, you're live at paix on your dell 1550's second ethernet port. > > Thanks a lot. I configured the peering LAN interface and it > works. Please configure rrc14.ripe.net as PTR. ok, that PTR is installed for 198.32.176.6. and the paix/s&d people said: > I put in the new names, and assigned the address: > > 3ffe:080a:0000:0000::9 /64 (or 3ffe:080a::9 /64 if you prefer) From arife at ripe.net Fri Dec 10 10:24:43 2004 From: arife at ripe.net (Arife Vural) Date: Fri, 10 Dec 2004 10:24:43 +0100 Subject: [ris-int] Re: RIPE NCC RIS box @ PAIX In-Reply-To: <20041210010423.E87DC13E12@sa.vix.com> References: <20041204080513.GA12301@ripe.net> <20041210010423.E87DC13E12@sa.vix.com> Message-ID: <20041210092442.GA6489@ripe.net> > > Thanks a lot. I configured the peering LAN interface and it > > works. Please configure rrc14.ripe.net as PTR. > > ok, that PTR is installed for 198.32.176.6. and the paix/s&d people said: It looks good. > > > I put in the new names, and assigned the address: > > > > 3ffe:080a:0000:0000::9 /64 (or 3ffe:080a::9 /64 if you prefer) Thanks, I have configured and it works. Arife From matthew at ripe.net Fri Dec 10 16:40:55 2004 From: matthew at ripe.net (Matthew Williams) Date: Fri, 10 Dec 2004 16:40:55 +0100 Subject: [ris-int] Web Access Report for the Routing Information Service - November, 2004 Message-ID: <001b01c4dece$a42a2070$150200c1@rockstar> Hi All, We have another monthly RIS Web Access Report available at the following URL: http://iii.ripe.net/np/WWW112004_RIS.pdf Please comment on oddities. Cheers, Matthew Ps. Future location: http://iii.ripe.net/sed/ris/reports/www/ --- > Matthew Williams (MW243-RIPE) > Customer Liaison Engineer > RIPE NCC - http://www.ripe.net/np/ -------------- next part -------------- A non-text attachment was scrubbed... Name: WWW112004_RIS.pdf Type: application/pdf Size: 254287 bytes Desc: not available URL: From arife at ripe.net Fri Dec 10 18:10:17 2004 From: arife at ripe.net (Arife Vural) Date: Fri, 10 Dec 2004 18:10:17 +0100 Subject: [ris-int] RIS Meeting on Monday Message-ID: <20041210171017.GN6489@ripe.net> Hi guys, I will be off Monday. If you like to have any urgent agenda item, please go and have the meeting. Quick update from my side: - RRC14 is online, first peering with ISC is up. Also got IPv6 address. I like to finish up RIS web page update and do announcement next week. - RIS CGI re-implementation, I'm working on it. ASInuse re-writing is finished with all tests, and we will do the prototype installation next week on halfweg. I will continue to work on the other CGIs. BTW, James, if you could send a quick update about Beacon change and RRC13, that would be great. Regards. Arife From 24-7rt at ripe.net Tue Dec 14 17:58:24 2004 From: 24-7rt at ripe.net (James Aldridge) Date: Tue, 14 Dec 2004 17:58:24 +0100 Subject: [ris-int] Re: [ripe.net #108816] Nagios: PROBLEM - halfweg/RISDATA CRITICAL In-Reply-To: Your message of "Tue, 14 Dec 2004 17:18:26 +0100." Message-ID: <200412141658.iBEGwOLE015068@birch.ripe.net> | ***** Nagiosreport from bee ***** | | Date/Time: Tue Dec 14 17:18:26 CET 2004 | | Notification Type: PROBLEM | | Host: halfweg - website and dataserver | Address: 193.0.0.212 | Service: RISDATA | State: CRITICAL | | Additional Info: | | HTTP CRITICAL: pattern not found | | Performance data: time= 0.019 Got paged for this one... It seems that somebody has changed halfweg:/export/archive01/index.html so that the title is no longer matches the check configured in nagios ("Routing Information Service Raw Data Page"). If this is a permanent change then I will update the nagios configuration. If it's going to change again in the future then please keep ops informed. James 24x7 of the week From arife at ripe.net Tue Dec 14 18:13:55 2004 From: arife at ripe.net (Arife Vural) Date: Tue, 14 Dec 2004 18:13:55 +0100 Subject: [ris-int] Re: [ripe.net #108816] Nagios: PROBLEM - halfweg/RISDATA CRITICAL In-Reply-To: <200412141658.iBEGwOLE015068@birch.ripe.net> References: <200412141658.iBEGwOLE015068@birch.ripe.net> Message-ID: <20041214171355.GK4944@ripe.net> Hi James, > Got paged for this one... > > It seems that somebody has changed halfweg:/export/archive01/index.html so > that the title is no longer matches the check configured in nagios ("Routing > Information Service Raw Data Page"). That's me. > If this is a permanent change then I will update the nagios configuration. If > it's going to change again in the future then please keep ops informed. Could you do the change on Nagois to reflect the situation? Sorry for getting paged you, next time I will let OPS know about the change. Arife > > James > 24x7 of the week From ugin at ripn.net Fri Dec 17 14:02:44 2004 From: ugin at ripn.net ('Evgueni Kouskevitch') Date: Fri, 17 Dec 2004 16:02:44 +0300 Subject: [ris-int] Re: Installation CD for RRC13 In-Reply-To: <20041116132726.GR937@ripe.net> References: <20041105101805.GE97218@argo.ripn.net> <015501c4cb31$fb15ea50$1f0200c1@rockstar> <20041115170415.GG44416@argo.ripn.net> <20041116102341.GH937@ripe.net> <20041116125806.GI33833@argo.ripn.net> <20041116132726.GR937@ripe.net> Message-ID: <20041217130244.GB35837@argo.ripn.net> On Tue, Nov 16, 2004 at 02:27:26PM +0100, Arife Vural wrote: > > Hi Evgueni, > > Thanks for getting back to us. There might be a problem at the > installation CD. We will get back to you about it. Hi, do you have any news about the case? > > Arife > > On Tue, Nov 16, 2004 at 03:58:06PM +0300, 'Evgueni Kouskevitch' wrote: > > On Tue, Nov 16, 2004 at 11:23:41AM +0100, Arife Vural wrote: > > > > > > Hi there, > > > > > > > The server will be mounted on to the rack tommorow morning. > > > > > > Did you have any problems when you did the installation? > > > > Yes. I didn't manage to install the system from your CD. > > I got a "Cannot find partition information for this host" when > > trying to run you .risinstall script, although the disk had > > been partitioned by utility from the same CD. > > > > Console (redirected to com-port and further via network) stops > > displaying any information right after > > "Loading linux.bin....................." string, probably due to > > changed display parameters. > > > > > > > > > > Arife > > > > -- > > Evgueni G. Kouskevitch Russian Institute for > > RIPN NOC:+7(095)192-9179 Public Networks -- Evgueni G. Kouskevitch Russian Institute for RIPN NOC:+7(095)192-9179 Public Networks From james at ripe.net Fri Dec 17 14:36:03 2004 From: james at ripe.net (James Aldridge) Date: Fri, 17 Dec 2004 14:36:03 +0100 Subject: [ris-int] Re: Installation CD for RRC13 In-Reply-To: Message from "'Evgueni Kouskevitch'" of "Fri, 17 Dec 2004 16:02:44 +0300." <20041217130244.GB35837@argo.ripn.net> Message-ID: <200412171336.iBHDa3gY026414@birch.ripe.net> "'Evgueni Kouskevitch'" wrote: > On Tue, Nov 16, 2004 at 02:27:26PM +0100, Arife Vural wrote: > > > > Hi Evgueni, > > > > Thanks for getting back to us. There might be a problem at the > > installation CD. We will get back to you about it. > > Hi, > > do you have any news about the case? I'm not sure of the exact configuration of the machine. Could you please let me know full details of the disk/raid controllers, etc. so I can check that this is properly supported by the installation CD. Regards, James From ugin at ripn.net Tue Dec 21 16:02:17 2004 From: ugin at ripn.net ('Evgueni Kouskevitch') Date: Tue, 21 Dec 2004 18:02:17 +0300 Subject: [ris-int] Re: Installation CD for RRC13 In-Reply-To: <200412171336.iBHDa3gY026414@birch.ripe.net> References: <20041217130244.GB35837@argo.ripn.net> <200412171336.iBHDa3gY026414@birch.ripe.net> Message-ID: <20041221150217.GB52980@argo.ripn.net> On Fri, Dec 17, 2004 at 02:36:03PM +0100, James Aldridge wrote: > "'Evgueni Kouskevitch'" wrote: > > On Tue, Nov 16, 2004 at 02:27:26PM +0100, Arife Vural wrote: > > > > > > Hi Evgueni, > > > > > > Thanks for getting back to us. There might be a problem at the > > > installation CD. We will get back to you about it. > > > > Hi, > > > > do you have any news about the case? > > I'm not sure of the exact configuration of the machine. Could you please let > me know full details of the disk/raid controllers, etc. so I can check that > this is properly supported by the installation CD. Hi, - PowerEdge Expandable RAID controller (BIOS H406 Oct 9 2003) - Three Fujitsu MAP3735NC drives configured as RAID 1 array, as described in "RIS RRC Migration - Dell PowerEdge 1550, 1750, 2550, 2650" document > > Regards, > James -- Evgueni G. Kouskevitch Russian Institute for RIPN NOC:+7(095)192-9179 Public Networks From emil at ripe.net Thu Dec 23 12:05:42 2004 From: emil at ripe.net (Emil Gorter) Date: Thu, 23 Dec 2004 12:05:42 +0100 Subject: [ris-int] Re: [ripe.net #103695] URGENT: need root access on halfweg In-Reply-To: Message from Arife Vural of "Mon, 13 Sep 2004 10:51:15 +0200." <20040913085114.GF14843@ripe.net> Message-ID: <200412231105.iBNB5g8Q001492@birch.ripe.net> On Mon, 13 Sep 2004 10:51:15 +0200, Arife Vural wrote: > > > > > For SED, it would be permenant. > > > > that's not up to me or you alone to decide, I'm afraid. > > So for now I assume things will have to be reverted to the way they > > were. If you / SED or NP need sudo permanently I need to discuss it > > at OPS. > > We discussed this issue at the last RIS meeting with Gerard and we > agreed to keep sudo for SED, not NP. Could you please check it out > with Gerard? to allow Arife to make changes required for "fail-over to weesp" so that we can performa maintenance on halfweg, I have (re- ??) enabled full sudo for SED on RIS hosts: >From /ncc/linuxmgr/rsync/conf/etc/sudoers/DEFAULT: Host_Alias RIS_HOSTS = diemen, weesp, halfweg # Sed can be root on RIS hosts (emil 20041223) %sudo-sed RIS_HOSTS = ALL Will keep this ticket open for a while longer.. E m i l . From arife at ripe.net Thu Dec 23 12:32:02 2004 From: arife at ripe.net (Arife Vural) Date: Thu, 23 Dec 2004 12:32:02 +0100 Subject: [ris-int] halfweg will be down shortly for maintenance Message-ID: <20041223113202.GD1559@ripe.net> Hi guys, halfweg will be down for maintenance in half an hour. one of the disk is making noises. Emil will look at it. I directed to RIS services to weesp. weesp will continue to answer user request during the downtime. Only, BGPlay is not running on weesp, I put a temporary message on the page saying service will not available for a while. Arife From arife at ripe.net Thu Dec 23 14:23:00 2004 From: arife at ripe.net (Arife Vural) Date: Thu, 23 Dec 2004 14:23:00 +0100 Subject: [ris-int] Re: [ripe.net #103695] URGENT: need root access on halfweg In-Reply-To: <200412231105.iBNB5g8Q001492@birch.ripe.net> References: <20040913085114.GF14843@ripe.net> <200412231105.iBNB5g8Q001492@birch.ripe.net> Message-ID: <20041223132300.GC4774@ripe.net> > to allow Arife to make changes required for "fail-over to weesp" so > that we can performa maintenance on halfweg, I have (re- ??) enabled > full sudo for SED on RIS hosts: Thanks Emil, that helped me a lot. > >From /ncc/linuxmgr/rsync/conf/etc/sudoers/DEFAULT: > > Host_Alias RIS_HOSTS = diemen, weesp, halfweg > > # Sed can be root on RIS hosts (emil 20041223) > %sudo-sed RIS_HOSTS = ALL > > > Will keep this ticket open for a while longer.. I think as SED we will need sudo access on RIS servers permanently. Arife From emil at ripe.net Thu Dec 23 14:50:07 2004 From: emil at ripe.net (Emil Gorter) Date: Thu, 23 Dec 2004 14:50:07 +0100 Subject: [ris-int] Re: noisy ext. disk on halfweg [ripe.net #107350] In-Reply-To: Message from Emil Gorter of "Tue, 14 Dec 2004 11:21:16 +0100." <200412141021.iBEALGLE017240@birch.ripe.net> Message-ID: <200412231350.iBNDo78Q027447@birch.ripe.net> Hi Arife, halfweg is up, and the noise is gone. It really came from the fan in the enclosure of sde & sdf (holding md1 / risfsa16). Boot up took very long because of fsck, but fortunately no errors seen. Please check that halfweg is healthy, and let me know if this ticket can be closed. Cheers, E m i l . From arife at ripe.net Thu Dec 23 15:37:20 2004 From: arife at ripe.net (Arife Vural) Date: Thu, 23 Dec 2004 15:37:20 +0100 Subject: [ris-int] Re: [sed] halfweg will be down shortly for maintenance In-Reply-To: <20041223113202.GD1559@ripe.net> References: <20041223113202.GD1559@ripe.net> Message-ID: <20041223143720.GE1559@ripe.net> Hi all, halfweg got back online almost an hour ago. Emil replaced the broken fan in one of the external things. Everything looks OK by now. I restored all services back to halfweg. Next year, I think we should consider to replace halfweg. Hardware is around 3 years old. A. On Thu, Dec 23, 2004 at 12:32:02PM +0100, Arife Vural wrote: > > Hi guys, > > halfweg will be down for maintenance in half an hour. one of the > disk is making noises. Emil will look at it. > > I directed to RIS services to weesp. weesp will continue to answer > user request during the downtime. Only, BGPlay is not running on > weesp, I put a temporary message on the page saying service will > not available for a while. > > Arife