From jarlah at finnetcom.net Mon Sep 1 15:18:15 2003 From: jarlah at finnetcom.net (=?ISO-8859-1?Q?Jarno_L=E4hteenm=E4ki?=) Date: Mon, 1 Sep 2003 16:18:15 +0300 (EEST) Subject: [ripecast] Linux / Unix client for Webcasting Message-ID: Hi, I used the VideoLan client (www.videolan.org) instead of MPlayer. I found it much more rich featured. It can turn unicast stream into multicast or vice versa. It can record into hard-drive. It supports also almost any known OS. --> Jarno L?hteenm?ki From Michal.Krsek at cesnet.cz Mon Sep 1 17:05:28 2003 From: Michal.Krsek at cesnet.cz (Michal Krsek) Date: Mon, 1 Sep 2003 17:05:28 +0200 (CEST) Subject: [ripecast] Anouncement Message-ID: Hello, I think it can be very valuable to place info about webcasting ho RIPE homepage. I think it grows the audience of the webcast more than three times. Regards Michal From bruce.campbell at ripe.net Tue Sep 2 18:04:36 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Tue, 2 Sep 2003 18:04:36 +0200 (CEST) Subject: [ripecast] Linux / Unix client for Webcasting In-Reply-To: Message-ID: On Mon, 1 Sep 2003, [ISO-8859-1] Jarno L?hteenm?ki wrote: > I used the VideoLan client (www.videolan.org) instead of MPlayer. > > I found it much more rich featured. It can turn unicast stream into > multicast or vice versa. It can record into hard-drive. It supports also > almost any known OS. I haven't tried this myself, but if it does support the Windows Media 9 Audio codec, go for it. Currently MPlayer does _NOT_ support this codec, which is closing out any unix/linux/*bsd users from hearing the sessions as our encoding only supports Windows Media 9 audio codecs. The obvious solution is that we change our encoder to use the previous codec (as used in Barcelona in May). Unfortunately, MS is not making the Windows Media 8 Audio codec available for their encoder (they do for the player) anymore. I'm somewhat redfaced that I didn't keep the original install file before having the machines reinstalled at the moment. -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security From cfriacas at fccn.pt Tue Sep 2 15:30:23 2003 From: cfriacas at fccn.pt (Carlos Friacas) Date: Tue, 2 Sep 2003 14:30:23 +0100 (WEST) Subject: [ripecast] IPv6 Webcast Message-ID: Hello, I've noticed today that CEZNET is providing a streaming server (RIPE-46 sessions) with IPv6: + server6.streaming.cesnet.cz + 2001:718:1:7:230:48ff:fe42:30de + traceroute6 is OK from here (11 hops) + ping6 is OK from here (55 avg rtt) However, im failing to see the session using version 9.00.00.3008 of MediaPlayer and VideoLan 0.5.2 under WinXP (and it works fine on the v4 streaming servers with both clients...) Has anybody tried this v6 server? Can anybody give me an hint on this? Thanks in advance. Regards, ./Carlos "Upgrade the Internet! -- Now!" -------------- [http://www.ip6.fccn.pt] http://www.fccn.pt , CMF8-RIPE, CF596-ARIN, Wide Area Network Workgroup FCCN - Fundacao para a Computacao Cientifica Nacional fax:+351 218472167 "Internet is just routes (125953/461), naming (millions) and... people!" From michal at krsek.cz Tue Sep 2 16:20:38 2003 From: michal at krsek.cz (Michal Krsek) Date: Tue, 2 Sep 2003 16:20:38 +0200 Subject: [ripecast] Re: [ipv6-wg@ripe.net] IPv6 Webcast References: <200309021349.h82Dn6e09343@morava.cesnet.cz> Message-ID: <00ab01c3715d$623762c0$6d0900c1@MICHALNB> Hi Carlos, I am admin of that server. It looks like someone is DoSing my Windows Media server. Can you try tune the netcast for now? Regards Michal ----- Original Message ----- From: "CESNET NIC" To: Sent: Tuesday, September 02, 2003 3:49 PM Subject: [ipv6-wg at ripe.net] IPv6 Webcast > Michale, toto se asi tyka Tebe. > > Zdravi Te Pavel. > > ------------- Begin Forwarded Message ------------- > > From: Carlos Friacas > To: ipv6-wg at ripe.net > Cc: ripecast at ripe.net > Subject: [ipv6-wg at ripe.net] IPv6 Webcast > List-Archive: > Date: Tue, 2 Sep 2003 14:30:23 +0100 (WEST) > > > Hello, > > I've noticed today that CEZNET is providing a streaming server (RIPE-46 > sessions) with IPv6: > > + server6.streaming.cesnet.cz > + 2001:718:1:7:230:48ff:fe42:30de > + traceroute6 is OK from here (11 hops) > + ping6 is OK from here (55 avg rtt) > > However, im failing to see the session using version 9.00.00.3008 of > MediaPlayer and VideoLan 0.5.2 under WinXP (and it works fine on the v4 > streaming servers with both clients...) > > Has anybody tried this v6 server? Can anybody give me an hint on this? > > Thanks in advance. > > Regards, > > ./Carlos "Upgrade the Internet! -- Now!" > -------------- [http://www.ip6.fccn.pt] http://www.fccn.pt > , CMF8-RIPE, CF596-ARIN, Wide Area Network Workgroup > FCCN - Fundacao para a Computacao Cientifica Nacional fax:+351 218472167 > > "Internet is just routes (125953/461), naming (millions) and... people!" > > > ------------- End Forwarded Message ------------- > > From matthew.ford at bt.com Tue Sep 2 16:38:16 2003 From: matthew.ford at bt.com (matthew.ford at bt.com) Date: Tue, 2 Sep 2003 15:38:16 +0100 Subject: [ripecast] RE: [ipv6-wg@ripe.net] IPv6 Webcast Message-ID: this is funny - the only server that works for me is the ipv6 server :-) mat > -----Original Message----- > From: Carlos Friacas [mailto:cfriacas at fccn.pt] > Sent: 02 September 2003 14:30 > To: ipv6-wg at ripe.net > Cc: ripecast at ripe.net > Subject: [ipv6-wg at ripe.net] IPv6 Webcast > > > > Hello, > > I've noticed today that CEZNET is providing a streaming > server (RIPE-46 > sessions) with IPv6: > > + server6.streaming.cesnet.cz > + 2001:718:1:7:230:48ff:fe42:30de > + traceroute6 is OK from here (11 hops) > + ping6 is OK from here (55 avg rtt) > > However, im failing to see the session using version 9.00.00.3008 of > MediaPlayer and VideoLan 0.5.2 under WinXP (and it works fine > on the v4 > streaming servers with both clients...) > > Has anybody tried this v6 server? Can anybody give me an hint on this? > > Thanks in advance. > > Regards, > > ./Carlos "Upgrade the > Internet! -- Now!" > -------------- [http://www.ip6.fccn.pt] > http://www.fccn.pt > , CMF8-RIPE, CF596-ARIN, > Wide Area Network Workgroup > FCCN - Fundacao para a Computacao Cientifica Nacional > fax:+351 218472167 > > "Internet is just routes (125953/461), naming (millions) > and... people!" > > From joao at isc.org Tue Sep 2 18:04:29 2003 From: joao at isc.org (Joao Damas) Date: Tue, 2 Sep 2003 18:04:29 +0200 Subject: [ripecast] Webcast during RIPE46 meeting In-Reply-To: Message-ID: <21E66546-DD5F-11D7-9B90-000A959B2120@isc.org> Trying to watch the webcast right now, I get image but no sound.Anything special going on? Joao From Boudewijn.Visser at xs4all.nl Wed Sep 3 03:48:45 2003 From: Boudewijn.Visser at xs4all.nl (Boudewijn Visser) Date: Wed, 3 Sep 2003 03:48:45 +0200 Subject: [ripecast] mplayer doesn't know the audio codec used (0xA) Message-ID: <20030903014845.GA69349@xs4all.nl> Hello RIPE Webcast people, I've tried to view the sessions being webcasted, and a problem. The audio codec used is not supported by mplayer, and I haven't been able to locate any other open source program capable of playing these streams. Mplayers identified the audio stream as follows : ======= WAVE Format ======= Format Tag: 10 (0xA) Channels: 1 Samplerate: 8000 avg byte/sec: 1000 Block align: 300 bits/sample: 16 [..] Cannot find codec for audio format 0xA A fairly extensive google search for the problem finds a few people who have the same problem, but no solutions. Checking the mplayer sources ( mplayer-1.0pre1 , latest release) shows that this codec/format is indeed unknown. I'd appreciate it if you could change the codec to either plain PCM, or MP3, for example. (Actually, what -is- the codec used at the moment ? ) Unless I missed something perhaps, in which case I hope you can provide a few pointers on how to use mplayer (or any other free unix tool ) to view and listen to the webcasts. ----- Apart from this problem though, I'd hope that RIPE would use non-propietary formats in general as much as possible. Regards, Boudewijn Visser From beck at ibh.de Wed Sep 3 10:09:27 2003 From: beck at ibh.de (Andre Beck) Date: Wed, 3 Sep 2003 10:09:27 +0200 Subject: [ripecast] Re: [local-ir@ripe.net]RIPE 46 Webcasting In-Reply-To: <200308290647.h7T6lvWt024080@birch.ripe.net> References: <200308290647.h7T6lvWt024080@birch.ripe.net> Message-ID: <20030903080927.GA4849@ibh.de> Hi, On Fri, Aug 29, 2003 at 08:47:57AM +0200, RIPE NCC Meeting Registration wrote: > > If are not able to attend the RIPE 46 Meeting in Amsterdam, please follow next the sessions live via internet. > > More info on RIPE 46 webcasting . I'm trying to view the transmission using MPlayer. The video is working as expected, but I cannot decode the audio stream: Cannot find codec for audio format 0xA. Do you have any idea how to get the audio with MPlayer? I'm using Debian Woody with the stable mplayer-686 and the full w32codecs packages from Marillat. TIA, Andre. -- The _S_anta _C_laus _O_peration or "how to turn a complete illusion into a neverending money source" -> Andre Beck +++ ABP-RIPE +++ IBH Prof. Dr. Horn GmbH, Dresden <- From bert.vermeulen at be.easynet.net Wed Sep 3 10:33:37 2003 From: bert.vermeulen at be.easynet.net (Bert Vermeulen) Date: Wed, 3 Sep 2003 10:33:37 +0200 (CEST) Subject: [ripecast] Linux / Unix client for Webcasting In-Reply-To: References: Message-ID: On Tue, 2 Sep 2003, Bruce Campbell wrote: > I haven't tried this myself, but if it does support the Windows Media 9 > Audio codec, go for it. Currently MPlayer does _NOT_ support this codec, > which is closing out any unix/linux/*bsd users from hearing the sessions > as our encoding only supports Windows Media 9 audio codecs. > > The obvious solution is that we change our encoder to use the previous > codec (as used in Barcelona in May). Unfortunately, MS is not making the > Windows Media 8 Audio codec available for their encoder (they do for the > player) anymore. I'm somewhat redfaced that I didn't keep the original > install file before having the machines reinstalled at the moment. Is there any way you can recode the streams? I'd really like to see some of the sessions, and I cannot use windows. Bert Vermeulen bert.vermeulen at be.easynet.net From jarlah at finnetcom.net Wed Sep 3 11:37:58 2003 From: jarlah at finnetcom.net (=?ISO-8859-1?Q?Jarno_L=E4hteenm=E4ki?=) Date: Wed, 3 Sep 2003 12:37:58 +0300 (EEST) Subject: [ripecast] Linux / Unix client for Webcasting In-Reply-To: Message-ID: Hi, I also noticed the audio codec problem just now. The standard videolan client can't play audio (video is ok thougth). I found free MP9 audio codec and I try to get it working with videolan client. I'll let you know when I have something new to tell... --> Jarno L?hteenm?ki --> Finnet Com Oy On Wed, 3 Sep 2003, Bert Vermeulen wrote: > On Tue, 2 Sep 2003, Bruce Campbell wrote: > > > I haven't tried this myself, but if it does support the Windows Media 9 > > Audio codec, go for it. Currently MPlayer does _NOT_ support this codec, > > which is closing out any unix/linux/*bsd users from hearing the sessions > > as our encoding only supports Windows Media 9 audio codecs. > > > > The obvious solution is that we change our encoder to use the previous > > codec (as used in Barcelona in May). Unfortunately, MS is not making the > > Windows Media 8 Audio codec available for their encoder (they do for the > > player) anymore. I'm somewhat redfaced that I didn't keep the original > > install file before having the machines reinstalled at the moment. > > Is there any way you can recode the streams? I'd really like to see some of > the sessions, and I cannot use windows. > > > Bert Vermeulen > bert.vermeulen at be.easynet.net > From mally at ripe.net Wed Sep 3 14:10:27 2003 From: mally at ripe.net (Mally Mclane) Date: Wed, 3 Sep 2003 14:10:27 +0200 (CEST) Subject: [ripecast] Audio under linux based players Message-ID: Dear Colleagues, As many of you have noticed, we currently have a problem where the audio we are encoding into, cannot be heard under (generally) linux based players, as no codec exists. Unfortunately at this present time we have been unable to find a solution to this, and we apologise unreservedly for something we should have foreseen. We will keep trying to find a solution (pointers/suggestions welcome!) during this week and after RIPE46 has finished, we will redouble our efforts to find such a solution. Once we find a solution, we will re-encode the archives that are being made of our sessions. Again, apologies for you not being able to hear the audio at this time and thanks for your interest! Regards, Mally Mclane RIPE NCC - Operations From matthew.ford at bt.com Wed Sep 3 15:37:53 2003 From: matthew.ford at bt.com (matthew.ford at bt.com) Date: Wed, 3 Sep 2003 14:37:53 +0100 Subject: [ripecast] RE: [ipv6-wg@ripe.net] IPv6 Webcast Message-ID: OK, so now all links from http://www.ripe.net/ripe/meetings/ripe-46/webcast.html are not working for me. The IPv6 link appears to connect but bombs out while 'buffering'. Is anyone succesfully connected at the moment? Mat > -----Original Message----- > From: matthew.ford at bt.com [mailto:matthew.ford at bt.com] > Sent: 02 September 2003 15:38 > To: cfriacas at fccn.pt; ipv6-wg at ripe.net > Cc: ripecast at ripe.net > Subject: RE: [ipv6-wg at ripe.net] IPv6 Webcast > > > this is funny - the only server that works for me is the ipv6 > server :-) > > mat > > > -----Original Message----- > > From: Carlos Friacas [mailto:cfriacas at fccn.pt] > > Sent: 02 September 2003 14:30 > > To: ipv6-wg at ripe.net > > Cc: ripecast at ripe.net > > Subject: [ipv6-wg at ripe.net] IPv6 Webcast > > > > > > > > Hello, > > > > I've noticed today that CEZNET is providing a streaming > > server (RIPE-46 > > sessions) with IPv6: > > > > + server6.streaming.cesnet.cz > > + 2001:718:1:7:230:48ff:fe42:30de > > + traceroute6 is OK from here (11 hops) > > + ping6 is OK from here (55 avg rtt) > > > > However, im failing to see the session using version 9.00.00.3008 of > > MediaPlayer and VideoLan 0.5.2 under WinXP (and it works fine > > on the v4 > > streaming servers with both clients...) > > > > Has anybody tried this v6 server? Can anybody give me an > hint on this? > > > > Thanks in advance. > > > > Regards, > > > > ./Carlos "Upgrade the > > Internet! -- Now!" > > -------------- [http://www.ip6.fccn.pt] > > http://www.fccn.pt > > , CMF8-RIPE, CF596-ARIN, > > Wide Area Network Workgroup > > FCCN - Fundacao para a Computacao Cientifica Nacional > > fax:+351 218472167 > > > > "Internet is just routes (125953/461), naming (millions) > > and... people!" > > > > > > From bruce.campbell at ripe.net Wed Sep 3 22:08:51 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Wed, 3 Sep 2003 22:08:51 +0200 (CEST) Subject: [ripecast] mplayer doesn't know the audio codec used (0xA) In-Reply-To: <20030903014845.GA69349@xs4all.nl> Message-ID: On Wed, 3 Sep 2003, Boudewijn Visser wrote: > I've tried to view the sessions being webcasted, and a problem. > > The audio codec used is not supported by mplayer, and I haven't been > able to locate any other open source program capable of playing these > streams. This problem has now been fixed. I've managed to get the older Windows Media Audio 8 codec installed on our equipment (an epic in itself), also using the same video codec (7) as before. If you wish to test it overnight before the main sessions resume in the morning, I've left the audio-only feed running at: mms://webcast.ripe.net/ripemtg-audio Regards, -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security From jeroen at unfix.org Thu Sep 4 01:48:23 2003 From: jeroen at unfix.org (Jeroen Massar) Date: Thu, 4 Sep 2003 01:48:23 +0200 Subject: [ripecast] RE: [ipv6-wg@ripe.net] IPv6 Webcast In-Reply-To: Message-ID: <002801c37275$dcde4480$210d640a@unfix.org> -----BEGIN PGP SIGNED MESSAGE----- matthew.ford at bt.com wrote: > OK, so now all links from > http://www.ripe.net/ripe/meetings/ripe-46/webcast.html are not working > for me. The IPv6 link appears to connect but bombs out while > 'buffering'. Is anyone succesfully connected at the moment? Currently (01:42 CET/Amsterdam time) there are no broadcasts thus one can't watch them either. The archives (bottom of the page) work, at least the IPv6-wg one did with Windows Mediaplayer 9 over my home DSL line. I haven't tested the live feeds but I understood from Jakub Vlasek (.cz) that he had quite a clear live feed there... BTW I wonder if the RIPE webmaster could either: directly store a ripe meetings url as: http://www.ripe.net/ripe/meetings/ripe-46/webcast.html or directly as: http://www.ripe.net/ripe/meetings/archive/ripe-46/webcast.html BTW I wonder what the idea is of moving it to archive after next week or somewhere as it is pretty clear that the current one is the last one etc. also a simple redirect under eg /ripe/meetings/current/ and /ripe/meetings/previous/ could help out there saving us from retyping this message then as all of the 'current' url's get invalidated in the mailarchives. Which is something quite unfortunate. Note that there is a w3c tip about this on their site. Greets, Jeroen -----BEGIN PGP SIGNATURE----- Version: Unfix PGP for Outlook Alpha 13 Int. Comment: Jeroen Massar / jeroen at unfix.org / http://unfix.org/~jeroen/ iQA/AwUBP1Z9xymqKFIzPnwjEQJ+EACgiJNM8OkqKEYMx9iwXIh8rTN027EAoL07 RUSuZ2RDreBuvZBpF7YkJyd9 =pB4y -----END PGP SIGNATURE----- From jrh at it.uc3m.es Thu Sep 4 08:56:43 2003 From: jrh at it.uc3m.es (Juan Rodriguez Hervella) Date: Thu, 4 Sep 2003 08:56:43 +0200 Subject: [ripecast] How to watch & listen the webcast using non-windows OSes, is it possible ? Message-ID: <200309040856.53282.jrh@it.uc3m.es> Hello, Does anybody know how to see the "mms" protocol with Linux or FreeBSD ? It seems that "mplayer" can not decode the audio format 0xA. If anybody knows other tool that works, plz tell me. If it were only possible to follow it with Windows, it would be a shame.... Regards. -- JFRH From matthew.ford at bt.com Thu Sep 4 11:12:56 2003 From: matthew.ford at bt.com (matthew.ford at bt.com) Date: Thu, 4 Sep 2003 10:12:56 +0100 Subject: [ripecast] RE: [ipv6-wg@ripe.net] IPv6 Webcast Message-ID: Thanks for helping Jeroen. My problems were entirely firewall related. Sorry for bothering you all. Mat > -----Original Message----- > From: Jeroen Massar [mailto:jeroen at unfix.org] > Sent: 04 September 2003 00:48 > To: Ford,M,Mat,XGH5 FORDM5 R; ipv6-wg at ripe.net > Cc: ripecast at ripe.net > Subject: RE: [ipv6-wg at ripe.net] IPv6 Webcast > > > -----BEGIN PGP SIGNED MESSAGE----- > > matthew.ford at bt.com wrote: > > > OK, so now all links from > > http://www.ripe.net/ripe/meetings/ripe-46/webcast.html are > not working > > for me. The IPv6 link appears to connect but bombs out while > > 'buffering'. Is anyone succesfully connected at the moment? > > Currently (01:42 CET/Amsterdam time) there are no broadcasts thus > one can't watch them either. The archives (bottom of the page) > work, at least the IPv6-wg one did with Windows Mediaplayer 9 over > my home DSL line. I haven't tested the live feeds but I understood > from Jakub Vlasek (.cz) that he had quite a clear live feed there... From woeber at cc.univie.ac.at Thu Sep 4 11:37:09 2003 From: woeber at cc.univie.ac.at (Wilfried Woeber, UniVie/ACOnet) Date: Thu, 04 Sep 2003 11:37:09 +0200 Subject: [ripecast] RE: [ipv6-wg@ripe.net] IPv6 Webcast Message-ID: <00A25661.56D71F94.1@cc.univie.ac.at> >OK, so now all links from >http://www.ripe.net/ripe/meetings/ripe-46/webcast.html are not working >for me. Just FYI, right now (4.9., 11:35) my WMP (V9) on XP refuses to play any of the streams. It complains about invalid format :-( This is just FYI, as I am in the big room, locally... Cheers, Wilfried. From bruce.campbell at ripe.net Thu Sep 4 14:37:56 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Thu, 4 Sep 2003 14:37:56 +0200 (CEST) Subject: [ripecast] How to watch & listen the webcast using non-windows OSes, is it possible ? In-Reply-To: <200309040856.53282.jrh@it.uc3m.es> Message-ID: On Thu, 4 Sep 2003, Juan Rodriguez Hervella wrote: > Does anybody know how to see the "mms" protocol with Linux or FreeBSD ? > > It seems that "mplayer" can not decode the audio format 0xA. This is the Audio format issue that we've previously been mentioning. The live stream, and archives created today, are using the Windows Media 8 audio codec, which MPlayer supports. You would have gotten this problem on sessions recorded prior to today, when we were using the Windows Media 9 audio codec, which MPlayer doesn't support and complains of unrecognised '0xA' format. Kind regards, -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security From niels.bakker at ams-ix.net Thu Sep 4 16:38:52 2003 From: niels.bakker at ams-ix.net (Niels Bakker) Date: Thu, 4 Sep 2003 16:38:52 +0200 Subject: [ripecast] RIPE meetings webcast Message-ID: <810E51D0-DEE5-11D7-96F4-000393D16788@ams-ix.net> Hi there, A few small comments on the video stream: - First, thanks for offering it! - mms://stream-ripe.wind.surfnet.nl/ripemtg works a lot better than mms://webcast.ripe.net/ripemtg from where I'm sitting (AMS-IX offices, AS1200) - Are you considering multicast? - You may want to add VLC (VideoLanClient) http://videolan.org/ to the list of working media players; the Mac OS X version is especially nice. Kind regards, -- Niels Bakker Tel: +31 205 141 716 Amsterdam Internet Exchange Mobile: +31 651 902 772 http://www.ams-ix.net/ E-mail: Niels.Bakker at ams-ix.net From bruce.campbell at ripe.net Fri Sep 5 10:36:18 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Fri, 5 Sep 2003 10:36:18 +0200 (CEST) Subject: [ripecast] RIPE meetings webcast In-Reply-To: <810E51D0-DEE5-11D7-96F4-000393D16788@ams-ix.net> Message-ID: On Thu, 4 Sep 2003, Niels Bakker wrote: > A few small comments on the video stream: > > - First, thanks for offering it! Dankuwel ;) > - mms://stream-ripe.wind.surfnet.nl/ripemtg works a lot better than > mms://webcast.ripe.net/ripemtg from where I'm sitting (AMS-IX offices, > AS1200) This could be that the webcast.ripe.net server is having trouble with too many connections (The mirrors are also grabbing their feed from there). I haven't really looked at this machine during the meeting. > - Are you considering multicast? Eventually, but we have no definite timeline for that. > - You may want to add VLC (VideoLanClient) http://videolan.org/ to the > list of working media players; the Mac OS X version is especially nice. Not a problem for this. Regards, -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security From m.ermert at gmx.de Fri Sep 5 12:33:33 2003 From: m.ermert at gmx.de (m.ermert at gmx.de) Date: Fri, 5 Sep 2003 12:33:33 +0200 (MEST) Subject: [ripecast] problems with one archived session Message-ID: <17852.1062758013@www64.gmx.net> Hi, there seems to be a problem with the archived webcast of NCC Services 2 (Thursday Morning 11-12.30). While other sessions are accessible without problems this one is not: mms://webcast.ripe.net/ripe46/services-2.wmv Thank you very much for checking and the offering of the webcasts in general, Monika PS. Live Webcast varied much in quality, sometimes connecting from my place, T-DSL line in Southern Germany, was nearly impossible, because of regular new buffering. Audiocast was completely unavailable yesterday evening and this morning (because of "to many sessions"). -- Monika Ermert Freelance Journalist Stauffenbergstrasse 54/1 D-72074 Tuebingen Fon +49 (0)7071 256703/256704 m.ermert at gmx.de From Boudewijn.Visser at xs4all.nl Fri Sep 5 17:20:57 2003 From: Boudewijn.Visser at xs4all.nl (Boudewijn Visser) Date: Fri, 5 Sep 2003 17:20:57 +0200 Subject: [ripecast] codec version on webarchive site/when recode ? Message-ID: <20030905152057.GA64679@xs4all.nl> Hello Bruce & other ripecast people, Thanks for finding a codec that works on Linux for thursday and later. (actually, I think it was already on wednesday or perhaps thursday morning that the audio-only session already worked, while the video session didn't. Was that your trial setup of the other codec, or a different setup from the start ? ) I'd appreciate it if you could update the archive website to include information on which codec was used for which session. It would save futile downloading of earlier sessions made with the non-supported codec. Also, any idea when you'll be able to re-encode the earlier sessions, as mentioned in Mally McLane's mail to the list ? Thanks, regards, Boudewijn Visser From pierno at napolinux.com Fri Sep 5 23:12:00 2003 From: pierno at napolinux.com (Eugenio Pierno) Date: Fri, 5 Sep 2003 23:12:00 +0200 (CEST) Subject: [ripecast] Dream agency webcast? Message-ID: Hi, there is a link to videolan (www.videolan.org) on http://www.ripe.net/ripe/meetings/ripe-46/webcast.html pointing to www.vlc.org, a "dream vacation agency" offering everything but the opensource software to watch video streams.. :-) I guess you may want to fix it. BTW, is there a plan to use a Real server for video/audio streaming in future? Cheers Eugenio -- "In a world without walls and fences you would not need windows and gates." From bruce.campbell at ripe.net Sat Sep 6 12:37:48 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Sat, 6 Sep 2003 12:37:48 +0200 (CEST) Subject: [ripecast] Dream agency webcast? In-Reply-To: Message-ID: On Fri, 5 Sep 2003, Eugenio Pierno wrote: > there is a link to videolan (www.videolan.org) on > > http://www.ripe.net/ripe/meetings/ripe-46/webcast.html > > pointing to www.vlc.org, a "dream vacation agency" offering > everything but the opensource software to watch video streams.. :-) > I guess you may want to fix it. Mistype on my part; its been corrected. > BTW, is there a plan to use a Real server for video/audio streaming in > future? We used the RealNetworks video format for the January meeting (RIPE44), and weren't too impressed with the video quality and certain other issues. Whilst we won't be using Real as the source encoding again, we _may_ (for RIPE47) re-encode the stream on the fly to Real (and possibly QuickTime) as an option. Regards, -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security From bruce.campbell at ripe.net Sat Sep 6 12:52:31 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Sat, 6 Sep 2003 12:52:31 +0200 (CEST) Subject: [ripecast] codec version on webarchive site/when recode ? In-Reply-To: <20030905152057.GA64679@xs4all.nl> Message-ID: On Fri, 5 Sep 2003, Boudewijn Visser wrote: > Thanks for finding a codec that works on Linux for thursday and later. > (actually, I think it was already on wednesday or perhaps thursday morning > that the audio-only session already worked, while the video session didn't. > Was that your trial setup of the other codec, or a different setup from the > start ? ) During the meeting, both streams originated from the same machine, and were using the same codecs. > I'd appreciate it if you could update the archive website to include > information on which codec was used for which session. > It would save futile downloading of earlier sessions made with the > non-supported codec. This change has been made. I also hope to get the sessions re-encoded on Monday. Regards, -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security From boudewijn.visser at xs4all.nl Sat Sep 6 22:11:58 2003 From: boudewijn.visser at xs4all.nl (Boudewijn Visser) Date: Sat, 6 Sep 2003 22:11:58 +0200 (CEST) Subject: [ripecast] codec version on webarchive site/when recode ? In-Reply-To: References: <20030905152057.GA64679@xs4all.nl> Message-ID: <21008.80.126.198.1.1062879118.squirrel@webmail.xs4all.nl> > On Fri, 5 Sep 2003, Boudewijn Visser wrote: > >> Thanks for finding a codec that works on Linux for thursday and later. >> (actually, I think it was already on wednesday or perhaps thursday >> morning >> that the audio-only session already worked, while the video session >> didn't. >> Was that your trial setup of the other codec, or a different setup from >> the >> start ? ) > > During the meeting, both streams originated from the same machine, and > were using the same codecs. > Well, there must be a few tweaks to the settings, since for example the eix1.wma audio only session of wednesday plays fine on mplayer. So apparantly the new software you used does still have the capability to encode audio in other formats. (mplayer output for eix1.wma audio session) ============ ASF Stream group == START === object size = 32 stream count=[0x1][1] stream id=[0x1][1] max bitrate=[0x4f8a][20362] ============ ASF Stream group == END === Clip info: name: RIPE46 Audio Stream ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 22050 Hz, 2 ch, 16 bit (0x10), ratio: 2501->88200 (20.0 kbit) Selected audio codec: [ffwmav2] afm:ffmpeg (DivX audio v2 (ffmpeg)) ========================================================================== (checking...) Same for the routing-1 audio only session of tuesday. mms://webcast.ripe.net/ripe46/routing-1.wma ... routing-2.wma is OK too. [apart from a terrible noise some 40 seconds from the start, like someone is using a high-pressure cleaner nearby]. dn-3.wma OK. So at least for audio-only sessions your original software could encode in a supported format. If you can find the right settings to make it do that for video+audio too it might save you the trouble of digging up the old software next time ;-) I didn't try them all, but it seems safe to say that all audio-only recordings work with mplayer, and only the combined audio/video sessions before thursday have the audio problem. >> I'd appreciate it if you could update the archive website to include >> information on which codec was used for which session. >> It would save futile downloading of earlier sessions made with the >> non-supported codec. > > This change has been made. I also hope to get the sessions re-encoded on > Monday. > Thanks, regards, Boudewijn Visser From chris at linx.net Mon Sep 8 13:27:51 2003 From: chris at linx.net (Chris Fletcher) Date: Mon, 08 Sep 2003 12:27:51 +0100 Subject: [ripecast] webcast codecs Message-ID: Thanks for the web cast - I didn't use it much - but did get my Linux box to display it with the old codecs - well done! The fun and games with the codecs for the live broadcast made me think about the format for the archives. The problem of data formats and long term archive is well known. Data has been lost due to lack of equipment to read the media. The problem with lack of code or specification to parse data probably hasn't hit yet but is becoming more likely with more and more proprietary standards that need a specific piece of code to read it. RIPE meeting archives are likely to be around for a long time. To make sure future generations can still view them I suggest the webcast archives are encoded in a well know publicly specified codec like MPEG rather than a transitory proprietary standard like the ones we had problems to support even today. I suspect that I will be able to find an MPEG decoder in 10 years time more easily than one for the codecs that were used for live broadcast. Using the latest codec-du-jour for the live broadcast is not a problem, the important point there is to get as much quality for your bits in a codec that is available on the current popular platforms, it's just the long term archives that need to be in an open standard. Chris. PS I've confused the various terms open, closed and proprietary etc. The important points for archiving are that they are well known, widely implemented and well documented so that in 10 years we can find or build an application that understands them. From bruce.campbell at ripe.net Mon Sep 8 17:11:54 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Mon, 8 Sep 2003 17:11:54 +0200 (CEST) Subject: [ripecast] problems with one archived session In-Reply-To: <17852.1062758013@www64.gmx.net> Message-ID: On Fri, 5 Sep 2003 m.ermert at gmx.de wrote: > there seems to be a problem with the archived webcast of NCC Services 2 > (Thursday Morning 11-12.30). While other sessions are accessible without problems > this one is not: > > mms://webcast.ripe.net/ripe46/services-2.wmv Some of the sessions were still on the meeting server when the meeting network was pulled down. I've now copied them across, so that the above and the Friday plenary sessions are now viewable. > PS. Live Webcast varied much in quality, sometimes connecting from my place, > T-DSL line in Southern Germany, was nearly impossible, because of regular > new buffering. I'm not sure I understand what you mean here. > Audiocast was completely unavailable yesterday evening and this > morning (because of "to many sessions"). The too many sessions problem is with our machine (webcast.ripe.net) as I had it configured to give priority to the mirror feeds. This needs to be looked at before the next meeting. -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security From apetrov at smrtlc.ru Mon Sep 15 07:55:45 2003 From: apetrov at smrtlc.ru (Anton V. Petrov) Date: Mon, 15 Sep 2003 10:55:45 +0500 (SAMST) Subject: [ripecast] webcasting host webcast-rm.ripe.net Message-ID: Hi, host webcast-rm.ripe.net seems to be down for a long time. Is there any alternate broadcasting of RIPE meetings? Regards, ------------------------- Anton V. Petrov ZAO Samara Telecom tel: +7 8462 704070 fax: +7 8462 704122 e-mail: apetrov at smrtlc.ru ------------------------- From bruce.campbell at ripe.net Tue Sep 16 17:47:48 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Tue, 16 Sep 2003 17:47:48 +0200 (CEST) Subject: [ripecast] webcasting host webcast-rm.ripe.net In-Reply-To: Message-ID: On Mon, 15 Sep 2003, Anton V. Petrov wrote: > host webcast-rm.ripe.net seems to be down for a long time. > Is there any alternate broadcasting of RIPE meetings? The machine 'webcast-rm.ripe.net' was setup for our RealMedia test for RIPE 44 in January. Since then, the machine has been turned off, and we are not relaying the webcasts through this machine. RIPE45 and RIPE46 utilised Windows Media for the webcast, and the public access machine of 'webcast.ripe.net' is still up and running (check http://www.ripe.net/ripe/meetings/ripe-46/webcast-archive.html for archive links ) Kind regards, -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security From Boudewijn.Visser at xs4all.nl Tue Sep 23 15:14:46 2003 From: Boudewijn.Visser at xs4all.nl (Boudewijn Visser) Date: Tue, 23 Sep 2003 15:14:46 +0200 Subject: [ripecast] re-encoding ? Message-ID: <20030923131445.GA39134@xs4all.nl> Hi Bruce, I just checked, but it seems none of the monday-wednesday sessions have been re-encoded yet with a codec that mplayer supports. Any idea when you'll be able to do that ? Thanks, regards, Boudewijn From bruce.campbell at ripe.net Thu Sep 25 14:54:12 2003 From: bruce.campbell at ripe.net (Bruce Campbell) Date: Thu, 25 Sep 2003 14:54:12 +0200 (CEST) Subject: [ripecast] re-encoding ? In-Reply-To: <20030923131445.GA39134@xs4all.nl> Message-ID: On Tue, 23 Sep 2003, Boudewijn Visser wrote: > I just checked, but it seems none of the monday-wednesday sessions have been > re-encoded yet with a codec that mplayer supports. > Any idea when you'll be able to do that ? Some of them have been re-encoded, but I haven't been updating the web page to link to the new files. I've fixed this (sessions with yellow backgrounds haven't been re-encoded yet) and will keep it updated. ( The re-encoding is being done by playing back the session files, so there is some loss of video and audio quality. The original files are still in place however. ) Regards, -- Bruce Campbell RIPE Systems/Network Engineer NCC www.ripe.net - PGP562C8B1B Operations/Security