[atlas] Replacing flash key

Hello Boris,

Do not remember exactly, but most likely I did reboot probe with the new 
key inserted at least once. In any case, I can do this test if you have 
some specific reasons to believe it will change something.

--

With Best Regards,
Marat Khalili

On 19/05/16 17:05, Boris Fersing wrote:
> Hi Marat,
>
> You said you inserted the USB key 10 minutes after the probe boot. 
> Have you tried to start the probe with the key already inserted?
>
> Cheers,
> Boris
>
> May 19 2016 9:53 AM, "Marat Khalili" <mkh at rqc.ru 
> <mailto:%22Marat%20Khalili%22%20%3Cmkh at rqc.ru%3E>> wrote:
>
>     My V3 probe (26656) disconnected yesterday, simple reboots didn't
>     help. Suspecting problem with USB key I first tried to replace it
>     with a new one. I took bog standard Transcend JetFlash 350 8Gb
>     right out of the wrapping and inserted it into a started probe 10
>     minutes after boot. Did not format the flash key or alter it in
>     any way, because someone previously said that it is not necessary.
>     Unfortunately, probe did not come up, and the flash key seems
>     unchanged after approximately 1 hour wait. What should I do to
>     switch to a new flash key? Also, did someone tried connecting
>     HDDs/SSDs, shouldn't they work better?
>
>     (Probe did appear after I inserted previously used flash key into
>     it, but I suspect problem will re-occur in the future, so I'd like
>     to know a way to fix it more permanently.)
>
>     --
>
>     With Best Regards,
>     Marat Khalili
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ripe.net/ripe/mail/archives/ripe-atlas/attachments/20160519/06a3780a/attachment.html>