[atlas] Probe update

Hi,

when I had problems with my probe I was been able to fix them leaving the
probe powered and connected to the network without the USB stick for at
least 10 minutes and then plugging in the USB stick.
At this point the probe should start formatting the USB stick and
reinstalling the Atlas software, hopefully solving your issues.

You can find an info table about the LEDs at this page:
https://atlas.ripe.net/about/faq/

I hope this is useful.

Matteo

On Tue, Jun 23, 2015 at 7:52 PM, Laurent Dumont <
laurent.dumont at coldnorthadmin.com> wrote:

> Hi gents,
>
> Small update on the probe status.
>
> I've tried a 2A usb power adapter and no dice. The Power and WPS led come
> on and a ethernet link seems to be active between the probe and the switch.
> Unfortunately, there is no DHCP discover or any kind of network activity
> from the probe. Anything else I can try to troubleshoot this?
>
> Is there a LED guide somewhere?
>
> --
> Laurent Dumont
> coldnorthadmin.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ripe.net/ripe/mail/archives/ripe-atlas/attachments/20150623/1e467e45/attachment.html>