[atlas] Dead Atlas Probe (TP-Link)
- Previous message (by thread): [atlas] Dead Atlas Probe (TP-Link)
- Next message (by thread): [atlas] Dead Atlas Probe (TP-Link)
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Phillip Remaker
remaker at gmail.com
Mon Dec 8 10:37:08 CET 2014
I have found that the Sandisk USB disks will fail, especially under low voltage conditions (underpowered adapter, for example). Alistair gave me instructions when mine failed. - Power off the RIPE Atlas Probe - Remove the USB stick - Power on the tp-link and connect it to the network - Wait for 5 minutes - Insert the USB stick while the RIPE Atlas Probe is powered. If that doesn't work, try a new 4GB USB drive instead. SanDisk was good about replacing the failed USB drive, but I think I'd use a different brand than can tolerate lower power. On Fri, Dec 5, 2014 at 3:11 PM, Florian Streibelt <florian at inet.tu-berlin.de > wrote: > Hi, > > I got a probe returned that was not able to connect to the Atlas > network. The probe was doint nothing for 2 days, only the leftmost LED > (Power) was on, nothing else seems to happen. > > I also had to learn, that after the probe was not working, the user > cleared the USB-Stick. > > Is there a way to resurrect the probe? Also the probe should be re-added > to my ambassador account, if possible. > > Greetings, > Florian > > -- > Florian Streibelt, Dipl.-Inf. building MAR, 4th floor, room 4.004 > Fachgebiet INET - Sekr. MAR 4-4 phone: +49 30 314 757 33 > Technische Universität Berlin gpg-fp: 5BE7 F008 8B83 9357 1108 > Marchstrasse 23 - 10587 Berlin 984A 3B8E A41F 82F6 1240 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.ripe.net/ripe/mail/archives/ripe-atlas/attachments/20141208/27cbcf43/attachment.html>
- Previous message (by thread): [atlas] Dead Atlas Probe (TP-Link)
- Next message (by thread): [atlas] Dead Atlas Probe (TP-Link)
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]