[irrtoolset]IRRToolsSet 4.8.2 - RtConfig missing junos support

Hello All,
this might have been already asked/answered but I can't manage to find it.
I've successfully compiled (RPSLng) IRRToolSet 4.8.2 under RedHat ES3.0 
but  soon realized that junos config option is not supported. Original 
SRCS && OBJS lines in the Makefile have been changed and all vendor 
specific modules, except for cisco, were excluded, i.e.:

# $Id: Makefile.in,v 4.8.6.2 2004/07/16 16:41:50 katie Exp $

GOAL   = RtConfig

#OBJS   = RtConfig.o  command.y.o  command.l.o  f_bcc.o f_cisco.o 
f_gated.o  f_rsd.o   f_junos.o
#SRCS   = RtConfig.cc command.y.cc command.l.cc f_bcc.cc f_cisco.cc 
f_gated.cc f_rsd.cc f_junos.cc
#HFILES = RtConfig.hh command.y.hh command.l.hh f_bcc.hh f_cisco.hh 
f_gated.hh f_rsd.hh f_junos.hh

OBJS   = RtConfig.o  command.y.o  command.l.o  f_cisco.o
SRCS   = RtConfig.cc command.y.cc command.l.cc f_cisco.cc
HFILES = RtConfig.hh command.y.hh command.l.hh f_cisco.hh


Attempts to compile the code with any other vendor module added fail. 
So, my guess is that they have been commented for a reason.
The same applies to "regular" 4.8.2 toolset, not only to RPSLng.

At RIPE ToolSet test site, RtConfig (with RPSLng) 
(http://www.ripe.net/cgi-bin/RtConfig-rpslng.cgi) behaves the same way. 
Regular RtConfig instead, does accept junos config option, which most 
probably means that binary was produced from different (release of) 
source code.

I would like to deploy RPSLng but I need "junos" support? How I can do 
that??

Thanks.
Regards,
Damir


-- 
Damir Pobric
Sr. Network Engineer
CANARIE
Desk:  +1 613 944 5608
CA*net 4 NOC: +1 613 944 5612
damir.pobric at canarie.ca
www.canarie.ca
Ten Years of Innovation
CANARIE 1993 - 2003