[ipv6-wg at ripe.net] RE: [sig-ipv6] Re: 9/9/2004 IP6.INT Removal (Was: 9/9/2006 : ip6.int shutdown?)

Well stated Mr. Manning.  Same for any updates from IETF for IPv6 (e.g.
2461, 2462, SEND, Optimistic DAD) as every vendor I know (e.g. routers,
switches, servers, clients, embedded systems) is shipping production
IPv6 within their OS release.  Any changes now to IPv6 will undergo
rigorous Q&A, whether it has a business case for deployment to update
the OS IPv6 features vs. other work for network centricity within the
stack, and general time to test interoperability.  Because the freeware
BSD and Linux bases do it does not mean that the vendors will do it.
Assume the time to change as it is for IPv4 now when we update or add
features.  The IETF can only provide specifications and suggestions
(INFO and BCP) to the market they cannot mandate anything to the market
and we have not for IPv4 either, it will not be different than IPv6.  

This is also dilemma we face for transition mechanisms.  Back when we
decided to follow the path that we do scenarios and then analysis and
killed the forward progress and work on Teredo, ISATAP, DSTM, and Tunnel
Broker some vendors and systems software entities did not stop building
them and they are now beginning to be deployed in test beds and some
early adopters.  This will find market interest and into vendor products
(note all of the ones listed above) and then when we do finish the specs
we will face the same problem with the transition mechanisms.

We do need to move to ipv6.arpa in the industry but it will happen
gradually and same as a note even for the updates to Base Transition
Mechanisms ergo RFC 2893 and I have already run into being asked about
IPv4 Compatible Addresses during deployment and those are dead now.
Same for the addressing architecture regarding TLAs and Site-Locals.

Lesson here is again assume a time to absorb for IPv6 products now just
like we do for IPv4.

The IPv6 Forum and NAv6TF can help here where the IETF cannot, and I
will take this to the members and industry, but it will take time.  It
is a deployment issue not a standards issue at this point.

The exception has been Mobile IPv6 and most vendors are all at RFC level
and that is because lots of customers want to begin early adoption with
MIPv6 and that keeps the vendors quite proactive on that one. 

P.S. Bill - the new initial IPv6 AAA at root for JP and KR are they to
use ipv6.arpa?  Thanks.

/jim 



> -----Original Message-----
> From: owner-v6ops at ops.ietf.org 
> [mailto:owner-v6ops at ops.ietf.org] On Behalf Of 
> bmanning at vacation.karoshi.com
> Sent: Sunday, July 25, 2004 5:45 PM
> To: Jeroen Massar
> Cc: Anand Kumria; Rob Blokzijl; v6ops at ops.ietf.org; 
> sig-ipv6 at apnic.net; ipv6-wg at ripe.net
> Subject: Re: [sig-ipv6] Re: 9/9/2004 IP6.INT Removal (Was: 
> 9/9/2006 : ip6.int shutdown?)
> 
> 
> 	whjile i applaud each and everyone who has expunged
> 	all ip6.int from their lives, the fact of the matter is that
> 	IETF fiat or no, there exist -many- systems that can only use
> 	reverse maps in the ip6.int tree.   
> 
> 	it will be maintained as long as there are queries for 
> 	it.  for those of you for whom ip6.int is a distant memory,
> 	pleae understand and respect the fact that you can not, 
> 	despite public posturing, force others to change their 
> 	systems. to practically remove ip6.int incures real cost
> 	in both time and cash.  in the US there is a term for what
> 	the IETF is trying to do w/ ip6.int.  Its called an unfunded
> 	mandate.  Unless or until the good folk in the IETF who are
> 	calling for the removal of ip6.int are ready to put up the 
> 	cash to effect real change, I wish they would stop.
> 
> 
> > > > On Thu, 2004-07-22 at 09:58, Kurt Erik Lindqvist wrote:
> > > > 
> > > > > On 2004-07-22, at 09.43, Jeroen Massar wrote:
> > > > > 
> > > > > > But indeed, if there is concensus or not 9/9/2004 
> and ip6.int 
> > > > > > is gone for me.
> > > > > 
> > > > > I vote for 9/9/2004 and getting rid of it properly. 
> Maintaining 
> > > > > two reverse threes will create more problems than it 
> will solve.
> > > 
> > > What, specifically, is the hurry? 
> > 
> > That this has been overdue for three years already and that even 
> > though the deprecation was marked in August 2001 some vendors still 
> > not have done the change. And as it is a 
> s/ip6.int/ip6.arpa/g which is 
> > very easy, if vendors did not do that yet they are way 
> overdue and you 
> > got to wonder how much their interest is in keeping 
> software upto date.
> > 
> > Basically we (at least me) have been waiting for the 6bone 
> to get the 
> > delegation so that we could remove the 2 trees and only keep one:
> > ip6.arpa. This was decided by the IAB thus we should live up to it.
> > 
> > If we do not remove ip6.int then still implementations 
> using it will 
> > not show up. They have had 3 years already to update...
> >  
> > > > Take your pick:
> > > > 
> > > > 
> http://unfix.org/~jeroen/archive/drafts/draft-massar-v6ops-ip6int-
> > > > removal-00.html 
> > > > 
> http://unfix.org/~jeroen/archive/drafts/draft-massar-v6ops-ip6int-
> > > > removal-00.txt 
> > > > 
> http://unfix.org/~jeroen/archive/drafts/draft-massar-v6ops-ip6int-
> > > > removal-00.xml
> > > > 
> > > > Short, quick and easy.
> > > > If no comments are risen for 16:00 today I'll submit 
> this as an ID.
> > > 
> > > Comments:
> > > 	e.f.f.3.ip6.arpa was documented in RFC3681 published in February
> > > 	2004 and actioned in July 2004.
> > 
> > Added, but note that this was all long overdue and there where a 
> > number of other solutions that would have worked already 2 
> years ago 
> > if there had not been any of the political arguments 
> holding back this 
> > technical issue. Note also that 6bone will end per 6/6/6 
> and that it is a TESTbed.
> > The TESTbed is delaying and thus hurting the production networks in 
> > this case.
> > 
> > > 	I'm assuming the actioning of e.f.f.3.ip6.arpa is the trigger
> > > 	for this I-D; if so, why do you want to wait so little time (2
> > > 	months) between e.f.f.3.ip6.arpa becoming available and
> > > 	requiring people to have updated resolver libraries?
> > 
> > People should have updated their resolvers in the last *3 years*.
> > If you have not done that already then you are not maintaining your 
> > machines properly and there is a big chance that you have bigger 
> > problems than a IPv6 reverse DNS that doesn't work anymore because 
> > ip6.int is gone.
> > 
> > > 	Personally I'd be more in favour of a 6 month timeout - i.e
> > > 	around last December or so.
> > 
> > Of course the date is up to discussion, but IMHO: ASAP and at least 
> > before the end of the year, the sooner the better.
> > 
> > Note that Cisco's IOS updates will be done before that date and 
> > Windows
> > XP2 will come out in August (they say) thus everybody using 
> IPv6 has 
> > time enough to upgrade. All "free unix flavors" already support it
> > 
> > Also users agree: http://www.sixxs.net/forum/?msg=general-83948
> > Note the begin date of that thread, we where really waiting 
> for 6bone 
> > just as being nice to the people still using it.
> > 
> > On Thu, 2004-07-22 at 10:57, Rob Blokzijl wrote: 
> > 
> > > > If no comments are risen for 16:00 today I'll submit 
> this as an ID.
> > > 
> > >     two minor points. In the abstract and the 
> introduction you write:
> > >       
> > >       RFC 3152 delegates IP6.ARPA for reverse IPv6 
> delegations. For RIRs 
> > >       (RIPE,ARIN,APNIC,LACNIC and soon AFNIC)
> > > 
> > >     Replace RIPE --> RIPE NCC
> > 
> > That I did that wrong is a major oops, I should by know the 
> difference by now.
> > 
> > >     Replace AFNIC --> AFRINIC
> > > 
> > >       (AFNIC is the .fr registry :-) )
> > 
> > Also adjusted and added some xref's in the XML.
> > 
> > Old version is now draft-massar-v6ops-ip6int-removal-00.a 
> new version 
> > carries the draft-massar-v6ops-ip6int-removal-00 name.
> > 
> > Greets,
> >  Jeroen
> > 
> 
> 
> 
> > *              sig-ipv6:  APNIC SIG on IPv6 technology and 
> policy issues           *
> > _______________________________________________
> > sig-ipv6 mailing list
> > sig-ipv6 at lists.apnic.net
> > http://mailman.apnic.net/mailman/listinfo/sig-ipv6
> 
> 
>