From andy at nosignal.org Thu Apr 5 11:09:30 2012 From: andy at nosignal.org (Andy Davidson) Date: Thu, 5 Apr 2012 10:09:30 +0100 Subject: whois.ripe.net seems dead over v6, working over v4. Message-ID: <636AF0EF-85DD-43E3-8F81-F7A4DE476657@nosignal.org> Dear colleagues, I am having timeout problems reaching whois.ripe.net over v6 this morning. In other words, it seems dead over v6. andy at chilli:~$ whois -h 193.0.6.135 ajbd-ripe % This is the RIPE Database query service. % The objects are in RPSL format. % % The RIPE Database is subject to Terms and Conditions. % See http://www.ripe.net/db/support/db-terms-conditions.pdf % Note: this output has been filtered. % To receive output for a database update, use the "-B" flag. % Information related to 'AJBD-RIPE' person: Andy Davidson address: Sheffield phone: +44-1143190605 nic-hdl: AJBD-RIPE remarks: Up the Mariners! mnt-by: MNT-AJBD source: RIPE # Filtered % This query was served by the RIPE Database Query Service (proxy) version 1.4.6 (WHOIS3) andy at chilli:~$ whois -h 2001:67c:2e8:22::c100:687 !$ whois -h 2001:67c:2e8:22::c100:687 ajbd-ripe Timeout. andy at chilli:~$ traceroute6 2001:67c:2e8:22::c100:687 traceroute to 2001:67c:2e8:22::c100:687 (2001:67c:2e8:22::c100:687) from 2001:67c:188:2::10, 30 hops max, 16 byte packets 1 2001:67c:188:2::1 (2001:67c:188:2::1) 1.613 ms 1.728 ms 2.18 ms 2 ge-1-0-8-314.rt0.the.uk.goscomb.net (2a01:348:0:4:0:24:0:1) 0.226 ms 0.197 ms 0.186 ms 3 ae0-700.rt0.sov.uk.goscomb.net (2a01:348::32:0:1) 0.382 ms 0.359 ms 0.336 ms 4 2a01:348::51:0:1 (2a01:348::51:0:1) 0.38 ms 0.386 ms 0.329 ms 5 linx-2601.ge-0-1-0.jun1.thn.network.bit.nl (2001:7f8:4::323b:1) 0.729 ms 0.611 ms 0.586 ms 6 806.xe-0-0-0.jun1.bit-2a.network.bit.nl (2001:7b8:0:326::1) 15.06 ms 14.884 ms 15.058 ms 7 gw.ipv6.amsix.telrtr.ripe.net (2001:7f8:1::a500:3333:2) 18.948 ms 18.986 ms 18.904 ms 8 * * * ^C From kranjbar at ripe.net Thu Apr 5 11:55:56 2012 From: kranjbar at ripe.net (Kaveh Ranjbar) Date: Thu, 5 Apr 2012 11:55:56 +0200 Subject: whois.ripe.net seems dead over v6, working over v4. In-Reply-To: <636AF0EF-85DD-43E3-8F81-F7A4DE476657@nosignal.org> References: <636AF0EF-85DD-43E3-8F81-F7A4DE476657@nosignal.org> Message-ID: <35947063-FDEE-4E3C-84BE-96D6CEB57CB9@ripe.net> Hi Andy, The whois is itself is up and running on v6 and is responding. The traceroute you have sent clearly shows there is a connectivity issue, however checking query logs we can see we are receiving the usual amount of queries over IPv6. I will forward this to our IT Department so they can investigate it further. Kind Regards, Kaveh. --- Kaveh Ranjbar, RIPE NCC Database Group Manager On Apr 5, 2012, at 11:09 AM, Andy Davidson wrote: > > Dear colleagues, > > I am having timeout problems reaching whois.ripe.net over v6 this morning. In other words, it seems dead over v6. > > > > > andy at chilli:~$ whois -h 193.0.6.135 ajbd-ripe > % This is the RIPE Database query service. > % The objects are in RPSL format. > % > % The RIPE Database is subject to Terms and Conditions. > % See http://www.ripe.net/db/support/db-terms-conditions.pdf > > % Note: this output has been filtered. > % To receive output for a database update, use the "-B" flag. > > % Information related to 'AJBD-RIPE' > > person: Andy Davidson > address: Sheffield > phone: +44-1143190605 > nic-hdl: AJBD-RIPE > remarks: Up the Mariners! > mnt-by: MNT-AJBD > source: RIPE # Filtered > > % This query was served by the RIPE Database Query Service (proxy) version 1.4.6 (WHOIS3) > > andy at chilli:~$ whois -h 2001:67c:2e8:22::c100:687 !$ > whois -h 2001:67c:2e8:22::c100:687 ajbd-ripe > Timeout. > > andy at chilli:~$ traceroute6 2001:67c:2e8:22::c100:687 > traceroute to 2001:67c:2e8:22::c100:687 (2001:67c:2e8:22::c100:687) from 2001:67c:188:2::10, 30 hops max, 16 byte packets > 1 2001:67c:188:2::1 (2001:67c:188:2::1) 1.613 ms 1.728 ms 2.18 ms > 2 ge-1-0-8-314.rt0.the.uk.goscomb.net (2a01:348:0:4:0:24:0:1) 0.226 ms 0.197 ms 0.186 ms > 3 ae0-700.rt0.sov.uk.goscomb.net (2a01:348::32:0:1) 0.382 ms 0.359 ms 0.336 ms > 4 2a01:348::51:0:1 (2a01:348::51:0:1) 0.38 ms 0.386 ms 0.329 ms > 5 linx-2601.ge-0-1-0.jun1.thn.network.bit.nl (2001:7f8:4::323b:1) 0.729 ms 0.611 ms 0.586 ms > 6 806.xe-0-0-0.jun1.bit-2a.network.bit.nl (2001:7b8:0:326::1) 15.06 ms 14.884 ms 15.058 ms > 7 gw.ipv6.amsix.telrtr.ripe.net (2001:7f8:1::a500:3333:2) 18.948 ms 18.986 ms 18.904 ms > 8 * * * > ^C From andy at nosignal.org Thu Apr 5 12:16:17 2012 From: andy at nosignal.org (Andy Davidson) Date: Thu, 5 Apr 2012 11:16:17 +0100 Subject: whois.ripe.net seems dead over v6, working over v4. In-Reply-To: <35947063-FDEE-4E3C-84BE-96D6CEB57CB9@ripe.net> References: <636AF0EF-85DD-43E3-8F81-F7A4DE476657@nosignal.org> <35947063-FDEE-4E3C-84BE-96D6CEB57CB9@ripe.net> Message-ID: <55752F01-BE67-427F-BC1A-A6439992FC2B@nosignal.org> Hi, I am not sure whether you did something, or someone in the middle did :-) but it's working now. Thanks in any case for investigating. Best wishes Andy On 5 Apr 2012, at 10:55, Kaveh Ranjbar wrote: > Hi Andy, > > The whois is itself is up and running on v6 and is responding. > The traceroute you have sent clearly shows there is a connectivity issue, however checking query logs we can see we are receiving the usual amount of queries over IPv6. I will forward this to our IT Department so they can investigate it further. > > Kind Regards, > Kaveh. > > --- > Kaveh Ranjbar, > RIPE NCC Database Group Manager > > On Apr 5, 2012, at 11:09 AM, Andy Davidson wrote: > >> >> Dear colleagues, >> >> I am having timeout problems reaching whois.ripe.net over v6 this morning. In other words, it seems dead over v6. >> >> >> >> >> andy at chilli:~$ whois -h 193.0.6.135 ajbd-ripe >> % This is the RIPE Database query service. >> % The objects are in RPSL format. >> % >> % The RIPE Database is subject to Terms and Conditions. >> % See http://www.ripe.net/db/support/db-terms-conditions.pdf >> >> % Note: this output has been filtered. >> % To receive output for a database update, use the "-B" flag. >> >> % Information related to 'AJBD-RIPE' >> >> person: Andy Davidson >> address: Sheffield >> phone: +44-1143190605 >> nic-hdl: AJBD-RIPE >> remarks: Up the Mariners! >> mnt-by: MNT-AJBD >> source: RIPE # Filtered >> >> % This query was served by the RIPE Database Query Service (proxy) version 1.4.6 (WHOIS3) >> >> andy at chilli:~$ whois -h 2001:67c:2e8:22::c100:687 !$ >> whois -h 2001:67c:2e8:22::c100:687 ajbd-ripe >> Timeout. >> >> andy at chilli:~$ traceroute6 2001:67c:2e8:22::c100:687 >> traceroute to 2001:67c:2e8:22::c100:687 (2001:67c:2e8:22::c100:687) from 2001:67c:188:2::10, 30 hops max, 16 byte packets >> 1 2001:67c:188:2::1 (2001:67c:188:2::1) 1.613 ms 1.728 ms 2.18 ms >> 2 ge-1-0-8-314.rt0.the.uk.goscomb.net (2a01:348:0:4:0:24:0:1) 0.226 ms 0.197 ms 0.186 ms >> 3 ae0-700.rt0.sov.uk.goscomb.net (2a01:348::32:0:1) 0.382 ms 0.359 ms 0.336 ms >> 4 2a01:348::51:0:1 (2a01:348::51:0:1) 0.38 ms 0.386 ms 0.329 ms >> 5 linx-2601.ge-0-1-0.jun1.thn.network.bit.nl (2001:7f8:4::323b:1) 0.729 ms 0.611 ms 0.586 ms >> 6 806.xe-0-0-0.jun1.bit-2a.network.bit.nl (2001:7b8:0:326::1) 15.06 ms 14.884 ms 15.058 ms >> 7 gw.ipv6.amsix.telrtr.ripe.net (2001:7f8:1::a500:3333:2) 18.948 ms 18.986 ms 18.904 ms >> 8 * * * >> ^C > From ishwinder at enbake.com Fri Apr 6 09:58:09 2012 From: ishwinder at enbake.com (Ishwinder Singh) Date: Fri, 6 Apr 2012 13:28:09 +0530 Subject: Inserting objects in the ripe test Message-ID: Hi All, I am trying to create an inetnum type of object in the ripe test database but i am unable to get past the eternal authorization error. The Maintainer in the test db that i am using is IS-MNT and i am requesting the ip range 193.0.0.0 - 193.0.0.255 (I am not sure if this should be a valid range for test db purposes but i assume that i should be able to get an inetnum in test db at any range). I have tried with maintainer IS11260-MNT(organization's maintainer) as well to no relief. I am sure that i have entered the correct session password on the passwords list. After doing all this i keep getting the following error: rom-Host: 124.253.3.194 - Date/Time: Fri Apr 6 09:43:11 2012 SUMMARY OF UPDATE: Number of objects found: 1 Number of objects processed successfully: 0 Create: 0 Modify: 0 Delete: 0 No Operation: 0 Number of objects processed with errors: 1 Create: 1 Modify: 0 Delete: 0 Syntax Errors: 0 DETAILED EXPLANATION: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The following object(s) were found to have ERRORS: --- Create FAILED: [inetnum] 193.0.0.0 - 193.0.0.255 ***Error: Authorisation failed ***Info: Syntax check passed inetnum: 193.0.0.0 - 193.0.0.255 netname: Test-Network descr: Testing for IS country: NL admin-c: IS1-TEST tech-c: IS1-TEST status: ASSIGNED PA mnt-by: IS-MNT mnt-by: IS11260-MNT changed: ishwinder at enbake.com source: TEST ***Warning: Date '20120406' added to changed: attribute 'ishwinder at enbake.com' ***Info: Authorisation for parent [inetnum] 0.0.0.0 - 255.255.255.255 using mnt-lower: not authenticated by: TEST-DBM-MNT ***Info: Authorisation for [inetnum] 193.0.0.0 - 193.0.0.255 using mnt-by: authenticated by: IS-MNT, IS11260-MNT ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The RIPE Database is subject to Terms and Conditions:http://www.ripe.net/db/support/db-terms-conditions.pdf For assistance or clarification please contact: RIPE Database Administration Can someone guide on what i am doing wrong here and how i can create a inetnum object? Thanks in advance -- Thanks & Regards, -------------- next part -------------- An HTML attachment was scrubbed... URL: From ishwinder at enbake.com Fri Apr 6 10:24:40 2012 From: ishwinder at enbake.com (Ishwinder Singh) Date: Fri, 6 Apr 2012 13:54:40 +0530 Subject: Inserting objects in the ripe test In-Reply-To: <4F7EA68B.1010608@serverunit.co.uk> References: <4F7EA68B.1010608@serverunit.co.uk> Message-ID: Hi Colin, That worked. Thanks a lot for the help. I created an inet range 10.11.12.0 - 10.11.12.255 in test db. Now when i go to creating a domain object in test db, I specify the domain as :12.11.10.in-addr-arpa but i get an error message which says that "there is no parent object" even after owning the inet range. Are there some domain values that can be used in test db for testing purposes? Thanks. On Fri, Apr 6, 2012 at 1:47 PM, Colin Davis wrote: > > Hi, > > The error message suggests TEST-DBM-MNT password has not been stored in > session. > > The password is "emptypassword" without the quotes. Try adding that then > having another go. > > Regards, > Colin. > > > > On 06/04/12 02:58, Ishwinder Singh wrote: > > Hi All, > > I am trying to create an inetnum type of object in the ripe test > database but i am unable to get past the eternal authorization error. The > Maintainer in the test db that i am using is IS-MNT and i am requesting the > ip range 193.0.0.0 - 193.0.0.255 (I am not sure if this should be a valid > range for test db purposes but i assume that i should be able to get an > inetnum in test db at any range). I have tried with > maintainer IS11260-MNT(organization's maintainer) as well to no relief. I > am sure that i have entered the correct session password on the passwords > list. After doing all this i keep getting the following error: > > rom-Host: 124.253.3.194 > - Date/Time: Fri Apr 6 09:43:11 2012 > > > SUMMARY OF UPDATE: > > Number of objects found: 1 > Number of objects processed successfully: 0 > Create: 0 > Modify: 0 > Delete: 0 > No Operation: 0 > Number of objects processed with errors: 1 > Create: 1 > Modify: 0 > Delete: 0 > Syntax Errors: 0 > > > DETAILED EXPLANATION: > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > The following object(s) were found to have ERRORS: > > > --- > Create FAILED: [inetnum] 193.0.0.0 - 193.0.0.255 > ***Error: Authorisation failed > ***Info: Syntax check passed > > inetnum: 193.0.0.0 - 193.0.0.255 > netname: Test-Network > descr: Testing for IS > country: NL > admin-c: IS1-TEST > tech-c: IS1-TEST > status: ASSIGNED PA > mnt-by: IS-MNT > mnt-by: IS11260-MNT > changed: ishwinder at enbake.com > source: TEST > ***Warning: Date '20120406' added to changed: attribute 'ishwinder at enbake.com' > > > ***Info: Authorisation for parent [inetnum] 0.0.0.0 - 255.255.255.255 > using mnt-lower: > not authenticated by: TEST-DBM-MNT > > ***Info: Authorisation for [inetnum] 193.0.0.0 - 193.0.0.255 > using mnt-by: > authenticated by: IS-MNT, IS11260-MNT > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > The RIPE Database is subject to Terms and Conditions:http://www.ripe.net/db/support/db-terms-conditions.pdf > > > For assistance or clarification please contact: > RIPE Database Administration > > > Can someone guide on what i am doing wrong here and how i can create a inetnum object? Thanks in advance > > > -- > Thanks & Regards, > > > -- Thanks & Regards, Ishwinder Singh Enbake Consulting. Phone: +91-987-28-20737 Skype: enbake. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ishwinder at enbake.com Fri Apr 6 10:59:32 2012 From: ishwinder at enbake.com (Ishwinder Singh) Date: Fri, 6 Apr 2012 14:29:32 +0530 Subject: Inserting objects in the ripe test In-Reply-To: <4F7EA9DE.2000600@serverunit.co.uk> References: <4F7EA68B.1010608@serverunit.co.uk> <4F7EA9DE.2000600@serverunit.co.uk> Message-ID: yeah .. sorry for the typo in teh mail. It now gives a better error: Error: Domain object contains no nameservers. ***Error: RDNS Authorisation failed Not sure if can use any nameserver on test db ? and why is authorization failing here? Thanks. On Fri, Apr 6, 2012 at 2:01 PM, Colin Davis wrote: > > Think you've got a typo - it's: > > 12.11.10.in-addr.arpa > > not > > 12.11.10.in-addr-arpa > > Regards, > Colin. > > > > > On 06/04/12 03:24, Ishwinder Singh wrote: > > Hi Colin, > > That worked. Thanks a lot for the help. I created an inet range > 10.11.12.0 - 10.11.12.255 in test db. Now when i go to creating a domain > object in test db, I specify the domain as :12.11.10.in-addr-arpa > > but i get an error message which says that "there is no parent object" > even after owning the inet range. Are there some domain values that can be > used in test db for testing purposes? > > Thanks. > > On Fri, Apr 6, 2012 at 1:47 PM, Colin Davis wrote: > >> >> Hi, >> >> The error message suggests TEST-DBM-MNT password has not been stored in >> session. >> >> The password is "emptypassword" without the quotes. Try adding that then >> having another go. >> >> Regards, >> Colin. >> >> >> >> On 06/04/12 02:58, Ishwinder Singh wrote: >> >> Hi All, >> >> I am trying to create an inetnum type of object in the ripe test >> database but i am unable to get past the eternal authorization error. The >> Maintainer in the test db that i am using is IS-MNT and i am requesting the >> ip range 193.0.0.0 - 193.0.0.255 (I am not sure if this should be a valid >> range for test db purposes but i assume that i should be able to get an >> inetnum in test db at any range). I have tried with >> maintainer IS11260-MNT(organization's maintainer) as well to no relief. I >> am sure that i have entered the correct session password on the passwords >> list. After doing all this i keep getting the following error: >> >> rom-Host: 124.253.3.194 >> - Date/Time: Fri Apr 6 09:43:11 2012 >> >> >> SUMMARY OF UPDATE: >> >> Number of objects found: 1 >> Number of objects processed successfully: 0 >> Create: 0 >> Modify: 0 >> Delete: 0 >> No Operation: 0 >> Number of objects processed with errors: 1 >> Create: 1 >> Modify: 0 >> Delete: 0 >> Syntax Errors: 0 >> >> >> DETAILED EXPLANATION: >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> The following object(s) were found to have ERRORS: >> >> >> --- >> Create FAILED: [inetnum] 193.0.0.0 - 193.0.0.255 >> ***Error: Authorisation failed >> ***Info: Syntax check passed >> >> inetnum: 193.0.0.0 - 193.0.0.255 >> netname: Test-Network >> descr: Testing for IS >> country: NL >> admin-c: IS1-TEST >> tech-c: IS1-TEST >> status: ASSIGNED PA >> mnt-by: IS-MNT >> mnt-by: IS11260-MNT >> changed: ishwinder at enbake.com >> source: TEST >> ***Warning: Date '20120406' added to changed: attribute 'ishwinder at enbake.com' >> >> >> ***Info: Authorisation for parent [inetnum] 0.0.0.0 - 255.255.255.255 >> using mnt-lower: >> not authenticated by: TEST-DBM-MNT >> >> ***Info: Authorisation for [inetnum] 193.0.0.0 - 193.0.0.255 >> using mnt-by: >> authenticated by: IS-MNT, IS11260-MNT >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> >> The RIPE Database is subject to Terms and Conditions:http://www.ripe.net/db/support/db-terms-conditions.pdf >> >> >> For assistance or clarification please contact: >> RIPE Database Administration >> >> >> Can someone guide on what i am doing wrong here and how i can create a inetnum object? Thanks in advance >> >> >> -- >> Thanks & Regards, >> >> >> > > > -- > Thanks & Regards, > Ishwinder Singh > Enbake Consulting. > Phone: +91-987-28-20737 > Skype: enbake. > > > -- Thanks & Regards, Ishwinder Singh Enbake Consulting. Phone: +91-987-28-20737 Skype: enbake. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Jamie.Stallwood at imerja.com Fri Apr 6 13:32:59 2012 From: Jamie.Stallwood at imerja.com (Jamie Stallwood) Date: Fri, 6 Apr 2012 12:32:59 +0100 Subject: Inserting objects in the ripe test References: <4F7EA68B.1010608@serverunit.co.uk><4F7EA9DE.2000600@serverunit.co.uk> Message-ID: <7B640CC73C18D94F83479A1D0B9A140405307B69@bhw-srv-dc1.imerja.com> nserver is a mandatory attribute, and in live the DNS server would need to host an SOA for the *.in-addr.arpa zone, but in test it probably doesn't check? Kind regards Jamie Stallwood -- Jamie Stallwood Security Specialist Imerja Limited Tel: 07795 840385 jamie.stallwood at imerja.com -----Original Message----- From: db-help-bounces at ripe.net on behalf of Ishwinder Singh Sent: Fri 06/04/2012 09:59 To: Colin Davis Cc: db-help at ripe.net Subject: Re: Inserting objects in the ripe test yeah .. sorry for the typo in teh mail. It now gives a better error: Error: Domain object contains no nameservers. ***Error: RDNS Authorisation failed Not sure if can use any nameserver on test db ? and why is authorization failing here? Thanks. On Fri, Apr 6, 2012 at 2:01 PM, Colin Davis wrote: > > Think you've got a typo - it's: > > 12.11.10.in-addr.arpa > > not > > 12.11.10.in-addr-arpa > > Regards, > Colin. > > > > > On 06/04/12 03:24, Ishwinder Singh wrote: > > Hi Colin, > > That worked. Thanks a lot for the help. I created an inet range > 10.11.12.0 - 10.11.12.255 in test db. Now when i go to creating a domain > object in test db, I specify the domain as :12.11.10.in-addr-arpa > > but i get an error message which says that "there is no parent object" > even after owning the inet range. Are there some domain values that can be > used in test db for testing purposes? > > Thanks. > > On Fri, Apr 6, 2012 at 1:47 PM, Colin Davis wrote: > >> >> Hi, >> >> The error message suggests TEST-DBM-MNT password has not been stored in >> session. >> >> The password is "emptypassword" without the quotes. Try adding that then >> having another go. >> >> Regards, >> Colin. >> >> >> >> On 06/04/12 02:58, Ishwinder Singh wrote: >> >> Hi All, >> >> I am trying to create an inetnum type of object in the ripe test >> database but i am unable to get past the eternal authorization error. The >> Maintainer in the test db that i am using is IS-MNT and i am requesting the >> ip range 193.0.0.0 - 193.0.0.255 (I am not sure if this should be a valid >> range for test db purposes but i assume that i should be able to get an >> inetnum in test db at any range). I have tried with >> maintainer IS11260-MNT(organization's maintainer) as well to no relief. I >> am sure that i have entered the correct session password on the passwords >> list. After doing all this i keep getting the following error: >> >> rom-Host: 124.253.3.194 >> - Date/Time: Fri Apr 6 09:43:11 2012 >> >> >> SUMMARY OF UPDATE: >> >> Number of objects found: 1 >> Number of objects processed successfully: 0 >> Create: 0 >> Modify: 0 >> Delete: 0 >> No Operation: 0 >> Number of objects processed with errors: 1 >> Create: 1 >> Modify: 0 >> Delete: 0 >> Syntax Errors: 0 >> >> >> DETAILED EXPLANATION: >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> The following object(s) were found to have ERRORS: >> >> >> --- >> Create FAILED: [inetnum] 193.0.0.0 - 193.0.0.255 >> ***Error: Authorisation failed >> ***Info: Syntax check passed >> >> inetnum: 193.0.0.0 - 193.0.0.255 >> netname: Test-Network >> descr: Testing for IS >> country: NL >> admin-c: IS1-TEST >> tech-c: IS1-TEST >> status: ASSIGNED PA >> mnt-by: IS-MNT >> mnt-by: IS11260-MNT >> changed: ishwinder at enbake.com >> source: TEST >> ***Warning: Date '20120406' added to changed: attribute 'ishwinder at enbake.com' >> >> >> ***Info: Authorisation for parent [inetnum] 0.0.0.0 - 255.255.255.255 >> using mnt-lower: >> not authenticated by: TEST-DBM-MNT >> >> ***Info: Authorisation for [inetnum] 193.0.0.0 - 193.0.0.255 >> using mnt-by: >> authenticated by: IS-MNT, IS11260-MNT >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> >> The RIPE Database is subject to Terms and Conditions:http://www.ripe.net/db/support/db-terms-conditions.pdf >> >> >> For assistance or clarification please contact: >> RIPE Database Administration >> >> >> Can someone guide on what i am doing wrong here and how i can create a inetnum object? Thanks in advance >> >> >> -- >> Thanks & Regards, >> >> >> > > > -- > Thanks & Regards, > Ishwinder Singh > Enbake Consulting. > Phone: +91-987-28-20737 > Skype: enbake. > > > -- Thanks & Regards, Ishwinder Singh Enbake Consulting. Phone: +91-987-28-20737 Skype: enbake. -- Imerja Limited Tel: 0870 8611488 | Fax: 0870 8611489 | 24x7 ISOC: 0870 8611490 | Web: www.imerja.com Registered Office: Paragon House, Paragon Business Park, Chorley New Road, Horwich, Bolton BL6 6HG Registered in England and Wales No. 5180119 VAT Registered No. 845 0647 22 ISO Registered Firm No. GB2001527 This email is confidential and intended solely for the person or organisation to which it is addressed. It may contain privileged and confidential information. If you are not the intended recipient(s) you should not use, copy, distribute or take any action or reliance on it, since to do so is strictly prohibited and may be unlawful. If you have received this transmission in error please notify the sender immediately by email reply and delete it from your system. E-mail messages are not secure and attachments could contain software viruses which may damage your system. Whilst every reasonable precaution has been taken to minimise this risk, Imerja Limited cannot accept any liability for any damage sustained as a result of these factors. You are advised to carry out your own virus checks before opening any attachment. Any views or opinions expressed in this e-mail are solely those of the author and do not represent those of Imerja Limited unless otherwise stated. -------------- next part -------------- An HTML attachment was scrubbed... URL: From colin at serverunit.co.uk Fri Apr 6 10:31:26 2012 From: colin at serverunit.co.uk (Colin Davis) Date: Fri, 06 Apr 2012 03:31:26 -0500 Subject: Inserting objects in the ripe test In-Reply-To: References: <4F7EA68B.1010608@serverunit.co.uk> Message-ID: <4F7EA9DE.2000600@serverunit.co.uk> Think you've got a typo - it's: 12.11.10.in-addr.arpa not 12.11.10.in-addr-arpa Regards, Colin. On 06/04/12 03:24, Ishwinder Singh wrote: > Hi Colin, > > That worked. Thanks a lot for the help. I created an inet range > 10.11.12.0 - 10.11.12.255 in test db. Now when i go to creating a > domain object in test db, I specify the domain as :12.11.10.in-addr-arpa > > but i get an error message which says that "there is no parent object" > even after owning the inet range. Are there some domain values that > can be used in test db for testing purposes? > > Thanks. > > On Fri, Apr 6, 2012 at 1:47 PM, Colin Davis > wrote: > > > Hi, > > The error message suggests TEST-DBM-MNT password has not been > stored in session. > > The password is "emptypassword" without the quotes. Try adding > that then having another go. > > Regards, > Colin. > > > > On 06/04/12 02:58, Ishwinder Singh wrote: >> Hi All, >> >> I am trying to create an inetnum type of object in the ripe test >> database but i am unable to get past the eternal authorization >> error. The Maintainer in the test db that i am using is IS-MNT >> and i am requesting the ip range 193.0.0.0 - 193.0.0.255 (I am >> not sure if this should be a valid range for test db purposes but >> i assume that i should be able to get an inetnum in test db at >> any range). I have tried with >> maintainer IS11260-MNT(organization's maintainer) as well to no >> relief. I am sure that i have entered the correct session >> password on the passwords list. After doing all this i keep >> getting the following error: >> >> rom-Host: 124.253.3.194 >> - Date/Time: Fri Apr 6 09:43:11 2012 >> >> >> SUMMARY OF UPDATE: >> >> Number of objects found: 1 >> Number of objects processed successfully: 0 >> Create: 0 >> Modify: 0 >> Delete: 0 >> No Operation: 0 >> Number of objects processed with errors: 1 >> Create: 1 >> Modify: 0 >> Delete: 0 >> Syntax Errors: 0 >> >> >> DETAILED EXPLANATION: >> >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> The following object(s) were found to have ERRORS: >> >> >> --- >> Create FAILED: [inetnum] 193.0.0.0 - 193.0.0.255 >> ***Error: Authorisation failed >> ***Info: Syntax check passed >> >> inetnum: 193.0.0.0 - 193.0.0.255 >> netname: Test-Network >> descr: Testing for IS >> country: NL >> admin-c: IS1-TEST >> tech-c: IS1-TEST >> status: ASSIGNED PA >> mnt-by: IS-MNT >> mnt-by: IS11260-MNT >> changed:ishwinder at enbake.com >> source: TEST >> ***Warning: Date '20120406' added to changed: attribute 'ishwinder at enbake.com ' >> >> >> ***Info: Authorisation for parent [inetnum] 0.0.0.0 - 255.255.255.255 >> using mnt-lower: >> not authenticated by: TEST-DBM-MNT >> >> ***Info: Authorisation for [inetnum] 193.0.0.0 - 193.0.0.255 >> using mnt-by: >> authenticated by: IS-MNT, IS11260-MNT >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> >> The RIPE Database is subject to Terms and Conditions: >> http://www.ripe.net/db/support/db-terms-conditions.pdf >> >> >> For assistance or clarification please contact: >> RIPE Database Administration> >> >> Can someone guide on what i am doing wrong here and how i can create a inetnum object? Thanks in advance >> >> -- >> Thanks & Regards, > > > > > -- > Thanks & Regards, > Ishwinder Singh > Enbake Consulting. > Phone: +91-987-28-20737 > Skype: enbake. -------------- next part -------------- An HTML attachment was scrubbed... URL: