You are here: Home > Publications > RIPE Document Store > Requirements For IPv6 in ICT Equipment

Changes to Requirements For IPv6 in ICT Equipment

Legend (+) Added (-) Deleted
Changed Tag Added Tag Deleted
ripe-501: Formulating requirements ripe-554: Requirements for IPv6 support can be done in several ways. In this document we look at three different options. ICT Equipment
delete: <h2> Contents delete: </h2> insert: <p class="alert alert-warning">

Please note that some of the links on this document are now obsolete insert: </p>

insert: <p>

insert: <strong> Table of contents: insert: </strong> insert: </p>

insert: <p>

  insert: </p>

delete: </li> delete: <li> delete: <a href="#3"> Option 3 delete: </a> delete: <ul> delete: <li> delete: <a href="#3text"> Proposed text for the tender initiator delete: </a> delete: </li> delete: </ul> delete: </li> delete: <li> delete: <a href="#ack"> Acknowledgements delete: </a> delete: </li> delete: </ul> delete: <hr noshade="noshade" size="1" /> insert: <p>

  insert: </p>

delete: <a id="1" name="1"> insert: <a name="introduction"> Introduction

To ensure the smooth and cost-efficient uptake of IPv6 across their networks, it is important that governments and large enterprises specify requirements for IPv6 compatibility when seeking tenders for information and computer technology Information and Communication Technology (ICT) equipment and support. This document is intended to provide a Best Common Current Practice (BCP) and does not specify any standards or policy itself. insert: </p>

insert: <p>

It can serve as a template that can be used by governments or governments, large enterprises and all other organisations when developing tender documents. seeking IPv6 support in their tenders or equipment requirements and offer guidance on what specifications to ask for. It can also serve as an aid to those people or organisations interested in tendering for government or enterprise contracts.

Formulating requirements for IPv6 support can Be aware that the standards listed here have their origin in various bodies, which operate independent of the RIPE community, and that any of these standards might be done in several ways. In changed or become replaced with a newer version. You may also need to adjust the recommendations to your specific local needs. insert: </p>

insert: <p>

Some parts of this document we look at three different options: delete: </p> delete: <ol> delete: <li> 1.Option 1 is section are loosely based loosely on the delete: <a href="http://www.antd.nist.gov/usgv6/"> NIST/USGv6 profile developed by the US government delete: </a> . government: insert: <a href="#_ftn1"> [1] insert: </a>
insert: <a href="http://www.antd.nist.gov/usgv6/" data-linktype="external" data-val="http://www.antd.nist.gov/usgv6/"> http://www.antd.nist.gov/usgv6/ insert: </a> insert: </p>

insert: <p>

The go6 expert council and the Slovenian IPv6 working group authors have modified these documents to make them more universally applicable. The new draft This option includes a list of RFC specification standards which that must be supported, divided into four eight categories of devices. delete: <br /> delete: <br /> delete: </li> delete: <li> 1.Option 2 is based insert: </p>

insert: <p>

This document also follows the IPv6 Node requirements document, RFC6434. This RFC is the general IETF guidance on compliance with the “IPv6 Ready” program, as specified what parts of IPv6 need to be implemented by the IPv6 Forum. different devices. insert: </p>

insert: <h3>

insert: <a name="intro1"> insert: </a> General information on how to use this document insert: </h3>

insert: <p>

An IPv6 Ready Logo certificate can be required for any device. This program is divided into two phases: Phase 1 includes is the easiest way for vendors providing the equipment to prove that it fulfills basic IPv6 requirements. The tender initiator shall also provide the list of required mandatory and optional RFCs in order not to exclude vendors that did not yet put their equipment under IPv6 Ready Logo testing and certification of the basic "core" protocols, while Phase 2 includes testing and certification of advanced IPv6 functionality. delete: <br /> delete: <br /> delete: </li> delete: <li> 1.Option 3 is a combination of the first two approaches. delete: </li> delete: </ol> delete: <h2> Option 1 delete: </h2> delete: <p> Requirements are divided in equipment and integrator support (output from go6 IPv6 WG). delete: </p> delete: <p> The following is the draft text that we propose be included in certifications. This way public tenders for ICT equipment, specifying can't be accused of preferring any type or vendor of equipment. insert: </p>

insert: <p>

When we specify the list of required RFCs, we must list all mandatory requirements, except the entries that start with, “If [functionality] is requested…” These entries are mandatory only if the tender initiator requires certain functionality. Please note that the tender initiator should decide what functionality is required, not the equipment vendor. insert: </p>

insert: <p>

Certain features that are in the 'optional' section in this document might be important for your specific case and/or organisation. In such cases the tender initiator should move the requirement to the 'required' section in their tender request. insert: </p>

insert: <h3>

insert: <a name="intro2"> insert: </a> How to specify requirements for IPv6 capability and support: delete: </p> delete: <blockquote> delete: <p> delete: <i> insert: </h3>

insert: <p>

As stated above, the IPv6 Ready Logo program does not cover all equipment that correctly supports IPv6; so declaring such equipment ineligible may not be desirable. This document recommends that the tender initiator specify that eligible equipment be either certified under the IPv6 Ready program or be compliant with the appropriate RFCs listed in the section below. insert: </p>

insert: <p>

About the IPv6 Ready Logo program: insert: <br />
insert: <a href="http://www.ipv6ready.org/"> http insert: </a> insert: <a href="http://www.ipv6ready.org/"> :// insert: </a> insert: <a href="http://www.ipv6ready.org/"> www insert: </a> insert: <a href="http://www.ipv6ready.org/"> . insert: </a> insert: <a href="http://www.ipv6ready.org/"> ipv insert: </a> insert: <a href="http://www.ipv6ready.org/"> 6 insert: </a> insert: <a href="http://www.ipv6ready.org/"> ready insert: </a> insert: <a href="http://www.ipv6ready.org/"> . insert: </a> insert: <a href="http://www.ipv6ready.org/"> org insert: </a> insert: <a href="http://www.ipv6ready.org/"> / insert: </a> insert: </p>

insert: <p>

Also note that there exists the BOUNDv6 project whose goal is to create a permanent multi-vendor network environment connecting approved laboratories where the community can test IPv6-enabled applications and devices in meaningful test scenarios. Tender initiators are encouraged to have a look and also use the results of this project. insert: </p>

insert: <p>

About BOUNDv6: insert: <br />
insert: <a href="http://www.boundv6.org/"> http insert: </a> insert: <a href="http://www.boundv6.org/"> :// insert: </a> insert: <a href="http://www.boundv6.org/"> www insert: </a> insert: <a href="http://www.boundv6.org/"> . insert: </a> insert: <a href="http://www.boundv6.org/"> boundv insert: </a> insert: <a href="http://www.boundv6.org/"> 6. insert: </a> insert: <a href="http://www.boundv6.org/"> org insert: </a> insert: <a href="http://www.boundv6.org/"> / insert: </a> insert: </p>

insert: <p>

  insert: </p>

insert: <p>

insert: <strong> Important note for tender initiator: insert: </strong> insert: </p>

insert: <p>

The IPv6 Ready Logo certification covers basic IPv6 requirements and some advanced features, but not all of them. If you require any advanced feature that is not covered by IPv6 Ready Logo certification, please request a list of RFCs that covers those specific needs in addition to IPv6 Logo Certification. In the lists below RFCs that are covered in the IPv6 Ready Logo certification are marked with *. insert: </p>

insert: <h2>

insert: <a name="proposed_generic_text"> insert: </a> Proposed generic text for the tender initiator insert: </h2>

insert: <p>

In every tender, following text shall be included: insert: </p>

insert: <p>

  insert: </p>

insert: <p>

insert: <em> All ICT hardware as subject of this tender must support both the IPv4 and IPv6 protocols. Similar performance must be provided for both protocols. There should not be more than ...% difference protocols in input, output and/or throughput data-flow performance, transmission and processing of packets between the two protocols. delete: </i> delete: </p> delete: <p> delete: <i> (Notes for tender initiators: For high-end devices we recommend to state a maximum difference of 15%. For enterprise grade devices we recommend a maximum of 30%. For consumer grade devices we recommend a maximum of 40%.) delete: </i> delete: </p> delete: <p> delete: <i> packets. insert: </em> insert: </p>

insert: <p>

  insert: </p>

insert: <p>

insert: <em> IPv6 support can be verified and certified by the IPv6 Ready Logo certificate. insert: </em> insert: </p>

insert: <p>

  insert: </p>

insert: <p>

insert: <em> Any software that communicates via the IP protocol must support both protocol versions (IPv4 and IPv6). The difference must not be noticeable to users. delete: </i> delete: </p> delete: </blockquote> insert: </em> insert: </p>

insert: <p>

  insert: </p>

insert: <p>

insert: <em> Equipment that has not been put through the IPv6 Ready testing procedures must comply with the RFCs listed below: insert: </em> insert: </p>

insert: <p>

  insert: </p>

insert: <p>

insert: <em> [appropriate list of selected mandatory and optional RFCs from below lists] insert: </em> insert: </p>

insert: <h2>

insert: <a name="lists_of_mandatory_and_optional"> insert: </a> Lists of mandatory and optional RFC/3GPP technical specifications support for various hardware and software insert: </h2>

insert: <p>

Requirements are divided by hardware equipment and integrator support. insert: </p>

insert: <p>

  insert: </p>

insert: <p>

It should be assumed that all IPv4 traffic will migrate to IPv6. All requirements placed on IPv4 traffic capabilities like latency, bandwidth and throughput should also be required for IPv6 traffic. insert: </p>

insert: <a name="ipsec"> insert: </a> IPsec: mandatory or optional insert: </h3>

insert: <p>

In the original IPv6 Node Requirements for (RFC4294) standard, IPsec was listed as a 'MUST' implement to be standards compliant. The updated RFC (RFC6434) changed IPsec to a 'SHOULD' implement. Reasons for the change are stated in this new RFC. insert: </p>

insert: <p>

The RIPE IPv6 Working Group has extensively discussed whether to make IPsec support of mandatory or optional. The most vocal constituents showed support for moving IPsec to the optional sections, which is what is reflected in this document. insert: </p>

insert: <p>

While the consensus of the community was to make IPsec optional in most cases, the IETF have now stated that IPsec 'SHOULD' be implemented in the latest version of the IPv6 Node Requirements standard (RFC6434). In the IETF context, a SHOULD means that there may exist valid reasons in particular circumstances to ignore a particular item, but the full implications must be understood and carefully weighed before choosing a different course. insert: </p>

insert: <p>

Organisations that use IPsec or expect to use it in the future should include the following in the mandatory section when initiating the tender: insert: <br />
• IPsec/IKEv2 [RFC4301, RFC4303, RFC4302, RFC5996] * insert: </p>

insert: <h3>

insert: <a name="devices"> insert: </a> Definitions and descriptions of different types of devices insert: </h3>

insert: <p>

The following definitions will be used for classifying the varying hardware equipment. While some hardware may have overlapping functionality (i.e., a Layer 2 switch can act as a Layer 3 router or a router may have some firewall capabilities), it is expected that for any overlapping functionality, the requirements for each specific device be combined. insert: </p>

insert: <p>

insert: <strong> insert: <em> Host: insert: </em> insert: </strong> A host is a network participant that sends and receives packets but does not forward them on behalf of others. insert: </p>

insert: <p>

insert: <strong> insert: <em> Switch, or ‘Layer 2 Switch': insert: </em> insert: </strong> A switch or ‘Layer 2 switch' is a device that is primarily used for forwarding Ethernet frames based on their attributes. Exchanging Ethernet information with other Ethernet switches is usually part of its function. insert: </p>

insert: <p>

insert: <strong> insert: <em> Router or ‘Layer 3 Switch': insert: </em> insert: </strong> A router or ‘Layer 3 switch' is a device that is primarily used for forwarding IP packets based on their attributes. Exchanging routing information with other Routers is usually part of its function. insert: </p>

insert: <p>

insert: <strong> insert: <em> Network Security Equipment: insert: </em> insert: </strong> Network security equipment is devices whose primary function is to permit, deny and/or monitor traffic between interfaces in order to detect or prevent potential malicious activity. These interfaces can also include VPNs (SSL or IPsec). Network Security Equipment is often also a Layer 2 switch or a Router/Layer 3 switch. insert: </p>

insert: <p>

insert: <strong> insert: <em> Customer Premise Equipment (CPE): insert: </em> insert: </strong> A CPE device is a small office or residential router that is used to connect home users and/or small offices in a myriad of configurations. Although a CPE is usually a Router, the requirements are different from an Enterprise/ISP Router Layer 3 switch. insert: </p>

insert: <p>

insert: <strong> insert: <em> Mobile Device insert: </em> insert: </strong> : In the context of this document, a mobile device is a node that connects to a 3GPP defined system using some 3GPP specified access technology (such as 2G, 3G, or LTE). For situations where the network logic is being provided solely by a dedicated device A connected to another device B, the specification will refer to device A and not to device B. If the protocol logic is distributed (e.g. a computer with an external Ethernet interface that performs TCP checksum offloading), the aggregate system is being referred to. insert: </p>

insert: <p>

insert: <strong> insert: <em> Load Balancer: insert: </em> insert: </strong> A load balancer is a networking device that distributes workload across multiple computers, servers or other resources, to achieve optimal or planned resource utilisation, maximise throughput, minimise response time, and avoid overload. insert: </p>

insert: <p>

  insert: </p>

insert: <p>

The following references are of relevance to this BCP document. At the time of publication, the editions indicated were valid. All references are subject to revision; users of this BCP document are therefore encouraged to investigate the possibility of applying the most recent edition of the references listed below. insert: </p>

insert: <h2>

insert: <a name="lists_of_required_standards"> insert: </a> Lists of required RFC/3GPP standards delete: </h3> for different types of hardware insert: </h2>

ICT hardware equipment can be roughly is divided into four seven functional groups:

  • Host: client or server
  • Layer 2 switch
  • Router or layer Layer 3 switch
  • Equipment to ensure network Network security equipment (firewalls, IDS, IPS, ...) IPS...) insert: </li>
  • insert: <li>
  • CPE insert: </li>
  • insert: <li>
  • Mobile device insert: </li>
  • insert: <li>
  • Load balancer

We have divided the following requirements into two categories, “mandatory” and “optional”. “mandatory” and “optional”. Equipment must meet the mandatory standards requirements list. Support for the optional requirements may earn the tender applicant additional points, if so specified by the tender initiator.

delete: <blockquote> delete: <p> Please note that all RFC references are correct at the time of writing, but may be superseded by developments in the IETF. For all updates, please see: delete: <br /> delete: <a href="http://www.rfc-editor.org/"> http://www.rfc-editor.org/ delete: </a> delete: </p> delete: </blockquote> delete: <h3> delete: <a id="hardware" name="hardware"> delete: </a> Hardware delete: </h3>

Any hardware that does not comply to with insert: <strong> all insert: </strong> of the mandatory standards is should be marked as inappropriate. inappropriate by the tender evaluator. insert: </p>

insert: <p>

The standards that are part of the IPv6 Ready Logo test procedures, typically performed by accredited labs, are marked with an asterisk *.

delete: <a id="host" name="host"> insert: <a name="requirements1"> Requirements for "host" equipment

delete: <b> Mandatory support: delete: </b>

  • IPv6 Basic specification [RFC2460] *
  • IPv6 Addressing Architecture basic [RFC4291] *
  • Default Address Selection [RFC3484]
  • Unique Local IPv6 Unicast Addresses (ULA) [RFC4193] insert: </li>
  • insert: <li>
  • ICMPv6 [RFC4443] *
  • DHCPv6 client [RFC3315] *
  • SLAAC [RFC4862] *
  • Path MTU Discovery [RFC1981] delete: </li> delete: <li> Neighbour * insert: </li>
  • insert: <li>
  • Neighbor Discovery [RFC4861] delete: </li> delete: <li> * insert: </li>
  • insert: <li>
  • If support for tunneling and dual stack is required, the device must support Basic Transition Mechanisms for IPv6 Hosts and Routers [RFC4213]
  • IPsec-v2 [RFC2401, RFC2406, RFC2402] delete: </li> delete: <li> IKE version 2 (IKEv2) [RFC4306, RFC4718] delete: </li> delete: <li> If support for mobile IPv6 is required, the device needs to comply to “MIPv6” [RFC3775, must support “MIPv6” [RFC6275, RFC5555] and “Mobile “Mobile IPv6 Operation With IKEv2 and the Revised IPsec Architecture” Architecture” [RFC4877]
  • DNS protocol extensions for incorporating IPv6 DNS resource records [RFC3596]
  • DNS message extension mechanism [RFC2671]
  • DNS message size requirements [RFC3226]
  • insert: <li>
  • Deprecation of Type 0 Routing Headers in IPv6 [RFC5095] * insert: </li>

delete: <b>   insert: </p>

insert: <p>

Optional support: delete: </b>

  • Revised ICMPv6 [RFC5095] IPv6 Router Advertisement Options for DNS Configuration [RFC6106]
  • Extended ICMP for multi-part messages [RFC4884]
  • SEND SeND [RFC3971]
  • SLAAC Privacy Extensions [RFC4941]
  • Stateless DHCPv6 [RFC3736] *
  • DS (Traffic class) [RFC2474, RFC3140]
  • Unique Local IPv6 Unicast Addresses (ULA) [RFC4193] delete: </li> delete: <li> Cryptographically Generated Addresses [RFC3972]
  • IPsec-v3 IPsec/IKEv2 [RFC4301, RFC4303, RFC4302] RFC4302, RFC5996] *
  • SNMP protocol [RFC3411]
  • SNMP capabilities [RFC3412, RFC3413, RFC3414] insert: </li>
  • insert: <li>
  • SNMP MIBs for IP [RFC4293] Forwarding [RFC4292] and DiffServ [RFC3289]
  • Multicast Listener Discovery version 2 [RFC3810] delete: </li> delete: <li> Packetization * insert: </li>
  • insert: <li>
  • Packetisation Layer Path MTU Discovery [RFC4821]
  • insert: <li>
  • IPv6 Host-to-Router Load Sharing [RFC4311] insert: </li>
  • insert: <li>
  • Default Router Preferences and More-Specific Routes [RFC4191] insert: </li>

delete: <a id="layer2con" name="layer2con"> insert: <a name="requirements2"> Requirements for consumer grade "layer "Layer 2 switch" equipment

delete: <b> Mandatory support: delete: </b> Optional support (management)

  • MLDv2 snooping [RFC4541]
  • delete: </ul> delete: <p> Optional support (management) delete: </p> delete: <ul>
  • IPv6 Basic specification [RFC2460] *
  • IPv6 Addressing Architecture basic [RFC4291] *
  • Default Address Selection [RFC3484]
  • ICMPv6 [RFC4443] *
  • SLAAC [RFC4862] *
  • SNMP protocol [RFC3411]
  • SNMP capabilities [RFC3412, RFC3413, RFC3414]
  • insert: <li>
  • SNMP MIBs for IP [RFC4293] Forwarding [RFC4292] and DiffServ [RFC3289] insert: </li>
insert: <p>

  insert: </p>

insert: <p>

  insert: </p>

insert: <p>

  insert: </p>

insert: <p>

  insert: </p>

delete: <a id="layer" name="layer2ent"> insert: <a name="requirements3"> Requirements for enterprise/ISP grade "layer "Layer 2 switch" equipment

delete: <b> Mandatory support: delete: </b>

  • MLDv2 snooping [RFC4541]
  • DHCPv6 snooping filtering [RFC3315] delete: <br /> DHCPv6 messages must be blocked between subscribers and the network so that false DHCPv6 servers cannot distribute addresses.
  • Router Advertisement (RA) filtering [RFC4862, RFC5006] delete: <br /> RA filtering must be used in the network to block unauthorised RA messages. [RFC4862]
  • Dynamic "IPv6 neighbour Neighbor solicitation/advertisement" inspection [RFC4862] delete: <br /> There must be an IPv6 neighbour solicitation/advertisement inspection, as in IPv4 "Dynamic ARP Inspection". The table with MAC-address and link-local and other assigned IPv6-addresses must be dynamically created by SLAAC or DHCPv6 messages. delete: </li> delete: <li> Neighbour [RFC4861] insert: </li>
  • insert: <li>
  • Neighbor Unreachability Detection [NUD, RFC4861] filtering delete: <br /> There must be a NUD filtering function to ensure that false NUD messages cannot be sent.
  • Duplicate Address Detection [DAD, RFC4429] snooping and filtering delete: <br /> Only authorised addresses may be allowed as source IPv6 addresses in DAD messages from each port. filtering. insert: <a href="#_ftn2"> [2] insert: </a>

delete: <b>   insert: </p>

insert: <p>

Optional support (management) delete: </b> (management):

  • IPv6 Basic specification [RFC2460] *
  • IPv6 Addressing Architecture basic [RFC4291] *
  • Default Address Selection [RFC3484]
  • ICMPv6 [RFC4443] *
  • SLAAC [RFC4862] *
  • SNMP protocol [RFC3411]
  • SNMP capabilities [RFC3412, RFC3413, RFC3414] insert: </li>
  • insert: <li>
  • SNMP MIBs for IP [RFC4293] Forwarding [RFC4292] and DiffServ [RFC3289]
  • IPv6 Routing Header [RFC2460, Next Header value 43] snooping delete: </li> delete: <li> IPv6 Routing Header messages must not be allowed between subscriber ports and subscriber and uplink to prevent routing loops [See also RFC5095, filtering * insert: </li>
  • insert: <li>
  • Deprecation of Type 0 Routing Headers in IPv6] IPv6 [RFC5095] *
  • UPnP filtering
  • delete: <li> UPnP messages must always be blocked between customer ports. There may be a possibility to filter different Ether types to allow only 0x86dd between subscriber ports. And most probably you must also permit 0×800 and 0×806 for IPv4. delete: </li>

delete: <a id="layer2" name="layer3"> insert: <a name="requirements4"> Requirements for "router or layer Layer 3 switch" equipment

delete: <b> Mandatory support: delete: </b>

  • IPv6 Basic specification [RFC2460] *
  • IPv6 Addressing Architecture basic [RFC4291] *
  • Default Address Selection [RFC3484]
  • Unique Local IPv6 Unicast Addresses (ULA) [RFC4193] insert: </li>
  • insert: <li>
  • ICMPv6 [RFC4443] *
  • SLAAC [RFC4862] *
  • MLDv2 snooping [RFC4541] insert: </li>
  • insert: <li>
  • Multicast Listener Discovery version 2 [RFC3810] *
  • Router-Alert option [RFC2711]
  • Path MTU Discovery [RFC1981] delete: </li> delete: <li> Neighbour * insert: </li>
  • insert: <li>
  • Neighbor Discovery [RFC4861] delete: </li> delete: <li> Classless Inter-domain routing [RFC4632] * insert: </li>
  • insert: <li>
  • Deprecation of Type 0 Routing Headers in IPv6 [RFC5095] *
  • If a dynamic internal guidance interior gateway protocol (IGP) is requested, then RIPng [RFC2080], OSPF-v3 [RFC5340] or IS-IS [RFC5308] must be supported. The contracting authority shall specify the required protocol.
  • If OSPF-v3 is requested, the equipment must comply with "Authentication/Confidentiality for OSPF-v3" [RFC4552]
  • If BGP4 protocol is requested, the equipment must comply with RFC4271, RFC1772, RFC4760, RFC1997, RFC3392 and RFC2545
  • Support for QoS [RFC2474, RFC3140]
  • If support for tunneling and dual stack is required, the device must support Basic Transition Mechanisms for IPv6 Hosts and Routers [RFC4213]
  • Using IPsec to Secure IPv6-in-IPv4 tunnels [RFC4891] delete: </li> delete: <li> If support for tunneling and dual stack is required, the device must support Generic Packet Tunneling and IPv6 [RFC2473]
  • If 6PE is requested, the equipment must comply with support "Connecting IPv6 Islands over IPv4 MPLS Using IPv6 Provider Edge Routers (6PE)” (6PE)” [RFC4798] delete: </li> delete: <li> Multicast Listener Discovery version 2 [RFC3810]
  • If mobile IPv6 is requested, the equipment must comply with support MIPv6 [RFC3775, [RFC6275, RFC5555] and "Mobile IPv6 Operation With IKEv2 and the Revised IPsec Architecture" Architecture” [RFC4877] insert: </li>
  • insert: <li>
  • If the IS-IS routing protocol is requested the equipment must support "M-ISIS: Multi-Topology (MT) Routing in Intermediate System to Intermediate Systems (IS-ISs)" [RFC5120]
  • If MPLS functionality (for example, BGP-free core, MPLS TE, MPLS FRR) is requested, the PE-routers and route reflectors must support "Connecting IPv6 Islands over IPv4 MPLS Using IPv6 Provider Edge Routers (6PE)" [RFC 4798] [RFC4798]
  • If layer-3 Layer 3 VPN functionality is requested, the PE-routers and route reflectors must support "BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN" [RFC 4659] [RFC4659]
  • If MPLS Traffic Engineering is used in combination with IS-IS routing protocol, the equipment must support "M-ISIS: Multi Topology Multi-Topology (MT) Routing in Intermediate System to Intermediate Systems (IS-ISs)" [RFC 5120] [RFC5120]

delete: <b>   insert: </p>

insert: <p>

Optional support delete: </b> support:

  • Revised ICMPv6 [RFC5095] IPv6 Router Advertisement Options for DNS Configuration [RFC6106]
  • DHCPv6 client / server client/server/relay [RFC3315] *
  • Extended ICMP for multi-part messages [RFC4884]
  • SEND SeND [RFC3971]
  • SLAAC Privacy Extensions [RFC4941]
  • Stateless DHCPv6 [RFC3736] *
  • DHCPv6 PD [RFC3633] *
  • Route Refresh for BGP Capabilities-4 BGP-4 Capabilities [RFC2918]
  • BGP Extended Communities Attribute [RFC4360]
  • (QOS), (QOS) Assured Forwarding [RFC2597]
  • (QOS) Expedited Forwarding [RFC3246]
  • Generic Routing Encapsulation [RFC2784]
  • Unique Local IPv6 Unicast Addresses (ULA) [RFC4193] delete: </li> delete: <li> Cryptographically Generated Addresses [RFC3972]
  • ProSafe-v3 IPsec/IKEv2 [RFC4301, RFC4303, RFC4302] delete: </li> delete: <li> IPSec-v2 [RFC2401, RFC2406, RFC2402] delete: </li> delete: <li> IKE version 2 (IKEv2) [RFC4306, RFC4718] RFC4302, RFC5996] * insert: </li>
  • insert: <li>
  • Using IPsec to Secure IPv6-in-IPv4 tunnels [RFC4891]
  • SNMP protocol [RFC3411]
  • SNMP capabilities [RFC3412, RFC3413, RFC3414]
  • Mibsam SNMP MIBs for IP [RFC4293] Forwarding [RFC4292], IPsec [RFC4807] [RFC4292] and DiffServ [RFC3289]
  • DNS protocol extensions for incorporating IPv6 DNS resource records [RFC3596]
  • DNS message extension mechanism [RFC2671]
  • DNS message size Requirements [RFC3226]
  • 127-bit IPv6 Prefixes on Inter-Router Links: delete: <br /> delete: <a href="http://tools.ietf.org/html/draft-kohno-ipv6-prefixlen-p2p-01"> http://tools.ietf.org/html/draft-kohno-ipv6-prefixlen-p2p-01 delete: </a> delete: </li> delete: <li> Packetization Links [RFC6164] insert: </li>
  • insert: <li>
  • Packetisation Layer Path MTU Discovery [RFC4821]
  • When IS-IS routing protocol is requested, the equipment should support "M-ISIS: Multi Topology (MT) Routing in Intermediate System to Intermediate Systems (IS-ISs)" [RFC 5120] (this support is highly recommended) IPv6 Host-to-Router Load Sharing [RFC4311] insert: </li>
  • insert: <li>
  • Default Router Preferences and More-Specific Routes [RFC4191]

delete: <a id="net-sec" name="net-sec"> insert: <a name="requirements5"> Requirements for "network security" equipment security equipment”

Equipment in this section is divided into three subgroups:

  • Firewall (FW)
  • Intrusion prevention device (IMS) (IPS)
  • Application firewall (APFW)
insert: <p>

  insert: </p>

For every mandatory standard the applicable subgroups are specified in parentheses at the end of the line.

delete: <b>   insert: </p>

insert: <p>

Mandatory support: delete: </b>

  • IPv6 Basic specification [RFC2460] (FW, IPS, APFW) *
  • IPv6 Addressing Architecture basic [RFC4291] (FW, IPS, APFW)
  • Default Address Selection [RFC3484] (FW, IPS, APFW)
  • ICMPv6 [RFC4443] (FW, IPS, APFW) *
  • SLAAC [RFC4862] (FW, IPS) * insert: </li>
  • insert: <li>
  • Deprecation of Type 0 Routing Headers in IPv6 [RFC5095] * insert: </li>
  • insert: <li>
  • Inspecting IPv6-in-IPv4 protocol-41 traffic, which is specified in: Basic Transition Mechanisms for IPv6 Hosts and Routers [RFC4213] (IPS)
  • Router-Alert option [RFC2711] (FW, IPS)
  • Path MTU Discovery [RFC1981] (FW, IPS, APWF) delete: </li> delete: <li> Neighbour APFW) * insert: </li>
  • insert: <li>
  • Neighbor Discovery [RFC4861] (FW, IPS, APFW) *
  • If the request is for the BGP4 protocol, the equipment must comply with RFC4271, RFC1772, RFC4760 and RFC2545 (FW, IPS, APFW)
  • If the request is for a dynamic internal guidance gateway protocol (IGP), then the required RIPng [RFC2080], OSPF-v3 [RFC5340] or IS-IS [RFC5308]. [RFC5308] must be supported. The contracting authority shall specify the required protocol. (FW, IPS, APFW)
  • If the requested OSPF-v3, OSPF-v3 is requested, the device must support "Authentication/Confidentiality for OSPFv3" [RFC4552] (FW, IPS, APFW)
  • Support for QoS [RFC2474, RFC3140] (FW (FW, APFW)
  • If tunneling is required, the device must support Basic Transition Mechanisms for IPv6 Hosts and Routers [RFC4213] (FW)
  • delete: <li> Using IPsec to Secure IPv6-in-IPv4 Tunnels [RFC4891] (FW) delete: </li>
insert: <p>

  insert: </p>

insert: <p>

A Network Security Device is often placed where a Layer 2 switch or a router/Layer 3 switch would otherwise be placed. Depending on this placement those requirements should be included. insert: </p>

insert: <p>

  insert: </p>

Functionality and features that are supported over IPv4 should be comparable with the functionalities functionality supported over IPv6. For example, if an intrusion prevention system is capable of operating over IPv4 in Layer 2 and Layer 3 mode, then it should also offer this functionality over IPv6. Or if a firewall is running in a cluster capable of synchronizing synchronising IPv4 sessions between all members of a cluster, then this must also be possible with IPv6 sessions.

delete: <b>   insert: </p>

insert: <p>

Optional support delete: </b> support:

  • Revised ICMPv6 [RFC5095] IPv6 Router Advertisement Options for DNS Configuration [RFC6106]
  • DHCPv6 client / server client/server/relay [RFC3315] *
  • Extended ICMP for Multipart Messages [RFC4884]
  • SEND SeND [RFC3971]
  • SLAAC Privacy Extensions [RFC4941]
  • Stateless DHCPv6 [RFC3736] *
  • DHCPv6 PD [RFC3633] *
  • BGP Communities Attribute [RFC1997]
  • BGP Capabilities Advertisement WITH-4 [RFC3392]
  • (QOS), (QOS) Assured Forwarding [RFC2597]
  • (QOS) Expedited Forwarding [RFC3246]
  • Unique Local IPv6 Unicast Addresses (ULA) [RFC4193]
  • Cryptographically Generated Addresses [RFC3972]
  • IPsec-v3 IPsec/IKEv2 [RFC4301, RFC4303, RFC4302] RFC4302, RFC5996] * insert: </li>
  • insert: <li>
  • Using IPsec to Secure IPv6-in-IPv4 Tunnels [RFC4891] (FW)
  • OSPF-v3 [RFC5340]
  • Authentication / Confidentiality Authentication/Confidentiality for OSPF-v3 [RFC4552]
  • Generic Packet Tunneling and IPv6 [RFC2473] delete: </li> delete: <li> IPsec-v2 [RFC2401, RFC2406, RFC2402] delete: </li> delete: <li> IKE version 2 (IKEv2) [RFC4306, RFC4718]
  • SNMP protocol [RFC3411]
  • SNMP capabilities [RFC3412, RFC3413, RFC3414]
  • SNMP MIBs for IP [RFC4293] Forwarding [RFC4292] and DiffServ [RFC3289] insert: </li>
  • insert: <li>
  • DNS protocol extensions for incorporating IPv6 DNS resource records to support IPv6 [RFC3596]
  • DNS message extension mechanism [RFC2671]
  • DNS message size requirements [RFC3226]
  • Using IPSec to Secure IPv6-in-IPv4 Tunnels [RFC4891]
  • Multicast Listener Discovery version 2 [RFC3810] *
  • MLDv2 snooping [RFC4541] (when in L2 or passthrough mode) delete: </li> delete: <li> Packetization * insert: </li>
  • insert: <li>
  • Packetisation Layer Path MTU Discovery [RFC4821]
  • insert: <li>
  • IPv6 Configuration in Internet Key Exchange Protocol Version 2 (IKEv2) [RFC5739] insert: </li>
  • insert: <li>
  • IPv6 Host-to-Router Load Sharing [RFC4311] insert: </li>
  • insert: <li>
  • Default Router Preferences and More-Specific Routes [RFC4191] insert: </li>

delete: <br /> delete: <a id="net-sec2" name="software"> insert: <a name="requirements6"> Requirements for IPv6 CPE equipment insert: </h3>

insert: <p>

Mandatory support: insert: </p>

insert: <ul>
    insert: <li>
  • RFC6204 (Basic Requirements for IPv6 Customer Edge Routers) * insert: </li>
  • insert: </ul>
insert: <p>

  insert: </p>

insert: <p>

Optional support: insert: </p>

insert: <ul>
    insert: <li>
  • IPsec/IKEv2 [RFC4301, RFC4303, RFC4302, RFC5996] * insert: </li>
  • insert: <li>
  • If support for mobile IPv6 is required, the device needs to comply to “MIPv6” [RFC6275, RFC5555] and “Mobile IPv6 Operation With IKEv2 and the Revised IPsec Architecture” [RFC4877] insert: </li>
  • insert: <li>
  • Extended ICMP for multi-part messages [RFC4884] insert: </li>
  • insert: <li>
  • SeND [RFC3971] insert: </li>
  • insert: <li>
  • SLAAC Privacy Extensions [RFC4941] insert: </li>
  • insert: <li>
  • DS (Traffic class) [RFC2474, RFC3140] insert: </li>
  • insert: <li>
  • Cryptographically Generated Addresses [RFC3972] insert: </li>
  • insert: <li>
  • SNMP protocol [RFC3411] insert: </li>
  • insert: <li>
  • SNMP capabilities [RFC3412, RFC3413, RFC3414] insert: </li>
  • insert: <li>
  • SNMP MIBs for IP [RFC4293] Forwarding [RFC4292] and DiffServ [RFC3289] insert: </li>
  • insert: <li>
  • Multicast Listener Discovery version 2 [RFC3810] * insert: </li>
  • insert: <li>
  • Packetisation Layer Path MTU Discovery [RFC4821] insert: </li>
  • insert: <li>
  • IPv6 Rapid Deployment on IPv4 Infrastructures (6rd) [RFC5969] insert: </li>
  • insert: <li>
  • Dual-Stack Lite Broadband Deployments Following IPv4 Exhaustion [RFC6333] If support this then also must support Dynamic Host Configuration protocol for IPv6 (DHCPv6) Option for Dual-Stack Lite [RFC6334] insert: </li>
  • insert: <li>
  • The A+P Approach to the IPv4 Address Shortage [RFC6346] insert: </li>
  • insert: <li>
  • IPv6 Configuration in Internet Key Exchange Protocol Version 2 (IKEv2) [RFC5739] insert: </li>
  • insert: <li>
  • IPv6 Host-to-Router Load Sharing [RFC4311] insert: </li>
  • insert: <li>
  • Default Router Preferences and More-Specific Routes [RFC4191] insert: </li>
  • insert: </ul>
insert: <h3>

insert: <a name="requirements7"> insert: </a> Requirements for mobile devices insert: </h3>

insert: <p>

Mandatory support: insert: </p>

insert: <ul>
    insert: <li>
  • IPv6 basic specification [RFC2460] * insert: </li>
  • insert: <li>
  • Neighbor Discovery for IPv6 [RFC4861] * insert: </li>
  • insert: <li>
  • IPv6 Stateless Address Autoconfiguration [RFC4862] * insert: </li>
  • insert: <li>
  • IPv6 Addressing Architecture [RFC4291] * insert: </li>
  • insert: <li>
  • ICMPv6 [RFC4443] * insert: </li>
  • insert: <li>
  • IPv6 over PPP [RFC2472] insert: </li>
  • insert: <li>
  • Multicast Listener Discovery version 2 [RFC3810] * insert: </li>
  • insert: <li>
  • IPv6 Router Alert Option [RFC2711] insert: </li>
  • insert: <li>
  • DNS protocol extensions for incorporating IPv6 DNS resource records [RFC3596] insert: </li>
  • insert: </ul>
insert: <p>

  insert: </p>

insert: <p>

Optional support: insert: </p>

insert: <ul>
    insert: <li>
  • Privacy Extensions for Stateless Address Autoconfiguration in IPv6 [RFC4941] insert: </li>
  • insert: <li>
  • Path MTU Discovery for IPv6 [RFC1981] * insert: </li>
  • insert: <li>
  • Generic Packet Tunneling for IPv6 [RFC2473] insert: </li>
  • insert: <li>
  • DHCPv6 [RFC3315] * insert: </li>
  • insert: <li>
  • Stateless DHCPv6 [RFC3736] insert: </li>
  • insert: <li>
  • DHCPv6 option for SIP servers [RFC3319] insert: </li>
  • insert: <li>
  • IPv6 Prefix Options for DHCPv6 [RFC3633] insert: </li>
  • insert: <li>
  • Prefix Exclude Option for DHCPv6-based Prefix Delegation [draft-ietf-dhc-pd-exclude] insert: </li>
  • insert: <li>
  • Default Address Selection [RFC3484] insert: </li>
  • insert: <li>
  • IPsec/IKEv2 [RFC4301, RFC4303, RFC4302, RFC5996] * insert: </li>
  • insert: <li>
  • IKEv2 Mobility and Multihoming Protocol MOBIKE [RFC 4555] insert: </li>
  • insert: <li>
  • IPv6 Host-to-Router Load Sharing [RFC4311] insert: </li>
  • insert: <li>
  • Default Router Preferences and More-Specific Routes [RFC4191] insert: </li>
  • insert: </ul>
insert: <p>

  insert: </p>

insert: <p>

References: insert: </p>

insert: <ul>
    insert: <li>
  • 3GPP insert: </li>
  • insert: <li>
  • Internetworking Between Public Land Mobile Network (PLMN) supporting packet based services and Packet Data Networks (PDN) [3GPP TS 29.061] insert: </li>
  • insert: <li>
  • GPRS Service Description [3GPP TS 23.060] insert: </li>
  • insert: <li>
  • General Packet Radio Service (GPRS) enhancements for Evolved Universal Terrestrial Radio Access Network (E-UTRAN) access [3GPP TS 23.401] insert: </li>
  • insert: <li>
  • Signaling flows for IP multimedia Call control based on SIP and SDP [3GPP TS 24.228] insert: </li>
  • insert: <li>
  • IP multimedia call control protocol based on SIP and SDP [3GPP TS 24.229] insert: </li>
  • insert: <li>
  • IP Based Multimedia Framework [3GPP TS 22.941] insert: </li>
  • insert: <li>
  • Architectural Requirements [3GPP TS 23.221] insert: </li>
  • insert: <li>
  • Packet domain; Mobile Stations (MS) Supporting Packet Switching Service [3GPP TS 27.060] insert: </li>
  • insert: <li>
  • IPv6 migration guidelines [3GPP TR 23.975] insert: </li>
  • insert: <li>
  • IETF insert: </li>
  • insert: <li>
  • IPv6 for Some Second and Third Generation Cellular Hosts [RFC3316] insert: </li>
  • insert: <li>
  • Recommendations for IPv6 in 3GPP Standards [RFC3314] insert: </li>
  • insert: <li>
  • IPv6 in 3rd Generation Partnership Project (3GPP) [RFC6459] insert: </li>
  • insert: </ul>
insert: <h3>

insert: <a name="requirements8"> insert: </a> Requirements for load balancers insert: </h3>

insert: <p>

A load balancer distributes incoming requests and/or connections from clients to multiple servers. Load balancers will have to support several combinations of IPv4 and IPv6 connections: insert: </p>

insert: <ul>
    insert: <li>
  • Load balancing IPv6 clients to IPv6 servers (6-to-6) insert: <strong> must insert: </strong> be supported insert: </li>
  • insert: <li>
  • Load balancing IPv6 clients to IPv4 servers (6-to-4) insert: <strong> must insert: </strong> be supported insert: </li>
  • insert: <li>
  • Load balancing IPv4 clients to IPv4 servers (4-to-4) insert: <strong> should insert: </strong> be supported insert: </li>
  • insert: <li>
  • Load balancing IPv4 clients to IPv6 servers (4-to-6) insert: <strong> should insert: </strong> be supported insert: </li>
  • insert: <li>
  • Load balancing a single external/virtual IPv4 address to a mixed set of IPv4 and IPv6 servers insert: <strong> should insert: </strong> be supported insert: </li>
  • insert: <li>
  • Load balancing a single external/virtual IPv6 address to a mixed set of IPv4 and IPv6 servers insert: <strong> should insert: </strong> be supported insert: </li>
  • insert: </ul>
insert: <p>

  insert: </p>

insert: <p>

If a load balancer provides Layer 7 (application level / reverse proxy, defined as ‘surrogate' in section 2.2 of RFC3040) load balancing then support for the X-forwarded-for (or equivalent) header in HTTP insert: <strong> must insert: </strong> be provided in order to make the source IP address of the client visible to the servers. insert: </p>

insert: <p>

  insert: </p>

insert: <p>

Mandatory support: insert: </p>

insert: <ul>
    insert: <li>
  • IPv6 Basic specification [RFC2460] * insert: </li>
  • insert: <li>
  • IPv6 Addressing Architecture [RFC4291] * insert: </li>
  • insert: <li>
  • Default Address Selection [RFC3484] insert: </li>
  • insert: <li>
  • Unique Local IPv6 Unicast Addresses (ULA) [RFC4193] insert: </li>
  • insert: <li>
  • ICMPv6 [RFC4443] * insert: </li>
  • insert: <li>
  • Path MTU Discovery [RFC1981] * insert: </li>
  • insert: <li>
  • Neighbor Discovery [RFC4861] * insert: </li>
  • insert: <li>
  • DNS protocol extensions for incorporating IPv6 DNS resource records [RFC3596] insert: </li>
  • insert: <li>
  • DNS message extension mechanism [RFC2671] insert: </li>
  • insert: <li>
  • DNS message size requirements [RFC3226] insert: </li>
  • insert: <li>
  • Deprecation of Type 0 Routing Headers in IPv6 [RFC5095] * insert: </li>
  • insert: </ul>
insert: <p>

  insert: </p>

insert: <p>

Optional support: insert: </p>

insert: <ul>
    insert: <li>
  • IPv6 Router Advertisement Options for DNS Configuration [RFC6106] insert: </li>
  • insert: <li>
  • Extended ICMP for multi-part messages [RFC4884] insert: </li>
  • insert: <li>
  • SeND [RFC3971] insert: </li>
  • insert: <li>
  • DS (Traffic class) [RFC2474, RFC3140] insert: </li>
  • insert: <li>
  • Cryptographically Generated Addresses [RFC3972] insert: </li>
  • insert: <li>
  • SNMP protocol [RFC3411] insert: </li>
  • insert: <li>
  • SNMP capabilities [RFC3412, RFC3413, RFC3414] insert: </li>
  • insert: <li>
  • SNMP MIBs for IP [RFC4293] Forwarding [RFC4292] and DiffServ [RFC3289] insert: </li>
  • insert: <li>
  • Multicast Listener Discovery version 2 [RFC3810] * insert: </li>
  • insert: <li>
  • Packetisation Layer Path MTU Discovery [RFC4821] insert: </li>
  • insert: <li>
  • NAT64/DNS64 [RFC6146, RFC6147] insert: </li>
  • insert: <li>
  • If support for IPsec is required, the device must support IPsec/IKEv2 [RFC4301, RFC4303, RFC4302, RFC5996] * and Redirect Mechanism for the Internet Key Exchange Protocol Version 2 (IKEv2) [RFC5685] insert: </li>
  • insert: <li>
  • If support for BGP4 is required, the equipment must comply with RFC4271, RFC1772, RFC4760 and RFC2545 insert: </li>
  • insert: <li>
  • If support for a dynamic internal gateway protocol (IGP) is required, the RIPng [RFC2080], OSPF-v3 [RFC5340] or IS-IS [RFC5308] must be supported. The contracting authority shall specify the required protocol. insert: </li>
  • insert: <li>
  • If OSPF-v3 is requested, the device must support "Authentication/Confidentiality for OSPFv3" [RFC4552] (FW, IPS, APFW) insert: </li>
  • insert: <li>
  • IPv6 Host-to-Router Load Sharing [RFC4311] (FW) insert: </li>
  • insert: <li>
  • Default Router Preferences and More-Specific Routes [RFC4191] (FW) insert: </li>
  • insert: </ul>
insert: <p>

  insert: </p>

insert: <h2>

  insert: </h2>

insert: <h2>

insert: <a name="requirements_ipv6_support"> insert: </a> Requirements for IPv6 support in software delete: </h3> insert: </h2>

All software must support IPv4 and IPv6 and be able to communicate over both types of IPv4-only, IPv6-only and dual-stack networks. If software includes network parameters in its local or remote server settings, it should also support configuration of IPv6 parameters.

Functional differences All features that are offered over IPv4 must not also be significantly different between IPv4 and available over IPv6. The user should not experience any significant noticeable difference when software is communicating over IPv4 or IPv6. delete: </p> delete: <h3> delete: <a id="net-sec3" name="skills"> IPv6, unless this is providing explicit benefit to the user. insert: </p>

insert: <p>

It is strongly recommended not to use any address literals in software code, as described in “Default Address Selection for Internet Protocol version 6” [RFC3484]. insert: </p>

insert: <h2>

insert: <a name="skill_requirements"> Skill requirements of the systems integrator delete: </h3> insert: </h2>

Vendors and reseller resellers that offer system integration services must have at least three employees who have valid certificates of competency from the equipment manufacturers for the equipment that is sold as part of the tender. These certificates employees must indicate a also have general knowledge of the IPv6 protocol, IPv6 network planning and IPv6 security. security (as also indicated by the certification for these skills). If it becomes obvious during the equipment installation and integration that the integrator's knowledge, competence and experience is not sufficient to successfully install and configure the equipment to establish normal IPv4 and IPv6 communication with the network, the agreement shall be cancelled canceled and become null and void.

The definition of proper integration, timing and degree of disruption of the network during the assembly shall be a matter of agreement between the client and systems integrator.

It is also recommended that a systems integrator and its employees have a broad knowledge of IPv6 and generic IPv6 certificates other than those specifically offered by the equipment manufacturers. These certificates can be obtained from independent education providers. Such knowledge may be awarded extra points in the tender process.

All bidders in the tender process must sign the following form, a declaration, which indicates that the company and its employees have passed technical training for design, construction and integration of ICT equipment in IPv4 and IPv6 networks. delete: </p> delete: <hr noshade="noshade" size="1" /> A sample of such a declaration is shown below. insert: </p>

delete: <a id="net-sec4" name="declaration"> delete: </a> DECLARATION  

delete: <p> insert: <h3>

insert: <a name="declaration"> insert: </a> Declaration of IPv6 competence insert: </h3>

insert: <p>

Tender initiators should require technical IPv6 competence for planning, building and integrating declaration from the equipment supplier or integrator. IPv6 knowledge and experience is required to assure proper installation and integration of IPv6 in the ICT environment. insert: </p>

insert: <p>

The declaration should say that the equipment in IPv4 and IPv6 networks and environments delete: </p> delete: <p> Company: ________________________________________ delete: </p> delete: <p> Address: ________________________________________ delete: </p> delete: <p> declares, supplier or system integrator declares under criminal and material responsibility:

insert: <p>

  insert: </p>

  • That we they have a sufficient number of people employed to perform offered services;
  • That those employees are professionally trained for their work - design, construction and integration of ICT equipment in both IPv4 and IPv6 networks and environments environments;
  • That the quality of offered services meets the requirements laid out in the tender documents. documents, and that these requirements apply to both IPv4 and IPv6.

Place ____________________ delete: </p> delete: <p> Date ____________________ delete: <br /> delete: <br /> delete: </p> delete: <p> Stamp and signature of Systems Integrator delete: </p> delete: <p> delete: </p> delete: <hr noshade="noshade" size="1" />   insert: </p>

insert: <p>

Note that declarations like this can vary depending on local legislation. Therefore translators and tender initiators should get legal advice on the exact wording for these requirements. insert: </p>

delete: <a id="2" name="2"> delete: </a> Option 2 delete: </h2> delete: <p> The tender initiator can require ICT equipment to be “Phase 1” or “Phase 2” certified under the “IPv6 Ready” program. Tests for both phases of certification can be done in five accredited laboratories around the world: TTA (Korea), BII (China), CHT-TL (Taiwan), IRISA (France) and UNH-IOL (US). These tests determine basic IPv6 protocols compliance (Phase 1, approximately 150 tests) and advanced IPv6 functionality (Phase 2, over 450 tests). delete: </p> delete: <ul> delete: <li> delete: <a href="http://www.ipv6ready.org/"> About the IPv6 Ready Program delete: </a> delete: </li> delete: <li> delete: <a href="http://ipv6ready.org/?page=phase-1-about"> About Phase 1 delete: </a> delete: </li> delete: <li> delete: <a href="http://ipv6ready.org/?page=phase-2-about"> About Phase 2 delete: </a> delete: </li> delete: </ul> delete: <p> Any other requirements for the system integrator remain the same as in the first option. delete: </p> delete: <h3> delete: <a id="2text" name="2text"> delete: </a> Proposed text for the tender initiator: delete: </h3> delete: <blockquote> delete: <p> delete: <i> ICT equipment that supports and communicates over the IPv4 protocol must also support the IPv6 protocol and be able to communicate with other devices over IPv6. Basic IPv6 support must be verified and certified by the IPv6 Ready program with a “Phase 1” logo certificate. A “Phase 2” logo certificate will be awarded additional points (+10%) in the tender evaluation procedure. delete: </i> delete: </p> delete: </blockquote> delete: <h3> Option 3 delete: </h3> delete: <p> The third option is a mix of the two alternatives outlined above. The IPv6 Ready program does not cover all equipment that correctly supports IPv6, so declaring such equipment ineligible may not be desirable. This option suggests that the tender initiator specify that eligible equipment may be either Phase 1 or Phase 2 certified under the IPv6 Ready program, or be compliant with the appropriate RFCs listed in Option 1. delete: </p> delete: <h3> delete: <a id="3text" name="3text"> delete: </a> Proposed text for the tender initiator: delete: </h3> delete: <blockquote> delete: <p> delete: <i> ICT equipment that supports and communicates over the IPv4 protocol must also support the IPv6 protocol and be able to communicate with other devices over IPv6. Basic IPv6 support must be verified and certified by the IPv6 Ready program with a “Phase 1” logo certificate. A “Phase 2” logo certificate will be awarded additional points (+10%) in the tender evaluation procedure. delete: </i> delete: </p> delete: <p> delete: <i> Equipment that has not been put through the IPv6 Ready testing procedures must comply with the RFCs listed below: delete: </i> delete: </p> delete: <p> delete: <i> [appropriate list of selected mandatory and optional RFCs from Option 1] delete: </i> delete: </p> delete: </blockquote> delete: <h2> delete: <a id="ack" name="ack"> insert: <a name="ack"> Acknowledgments

insert: <p>

The first version of this document was done in the Go6 Expert Council and the Slovenian IPv6 working group. insert: </p>

The authors would like to thank all everyone involved in the creation and modification of previous version of this document. First of all all, we would like to thank Janez Sterle, Urban Kunc, Matjaz Straus, Simeon Lisec, Davor Sostaric and Matjaz Lenassi from the go6 expert council Go6 Expert Council for their enthusiastic governance of this document. We recognise the work done in the Slovenian IPv6 working group and thank them for their review and useful input, with special input. Special recognition goes to Ivan Pepelnjak, Andrej Kobal and Ragnar Us for their efforts and work done on the document. Thanks also go to the Co-chairs to the co-Chairs of RIPE IPv6 Working Group, David Kessens, Shane Kerr and Marco Hogewoning, Hogewoning for their support and encouragement. We would also like to thank Patrik Fältström, Torbjörn Eklöv, Fältström, Torbjörn Eklöv, Randy Bush and Bush, Matsuzaki Yoshinobu, Ides Vanneuville, Olaf Maennel, Ole Troan, Trøan, Teemu Savolainen and people from RIPE IPv6 WG Working Group (Joao Damas, S.P.Zeidler, S.P. Zeidler, Gert Döring and Doering among others) for their input, comments and review of the document. Last, Last but not least least, we would like to thank Chris Buckridge and the Communications Team from the RIPE NCC staff for correcting our grammar and wording in this document. And everybody everyone else that who contributed to this work.

insert: <p>

The authors of this document would like to thank the RIPE IPv6 Working Group and its chairs for all of the support and encouragement to develop a follow-up version of the document. Special thanks goes to Ole Trøan, editor of RFC6204 for his help in the CPE section and for suggesting other changes across the document. Thanks to Marco Hogewoning, Ivan Pepelnjak and S.P. Zeidler for great input in ideas how to make the document structure and content better, Timothy Winters and Erica Johnson (both IPv6 Ready Logo committee, UNH) for help in marking RFCs they test and constructive suggestions. Thanks also to Yannis Nikolopoulos and Frits Nolet. Special thanks goes to Jouni Korhonen, Jari Arkko, Eric Vyncke, David Freedman, Tero Kivinen and Michael Richardson for some very useful comments and suggestions that made this document much better. insert: </p>

insert: <p>

Suggestions for improvement to this document and other comments can be sent to to the RIPE IPv6 Working Group mailing list < insert: <a href="mailto:ipv6-wg@ripe.net"> ipv6-wg@ripe.net insert: </a> >. insert: </p>

insert: <p>

  insert: </p>

insert: <hr align="left" size="1" width="33%" />
insert: <p>

insert: <a href="#_ftnref1"> [1] insert: </a> The USGv6 specifications are currently undergoing an updated revision which is expected to be completed by early 2012 insert: </p>

insert: <p>

insert: <a href="#_ftnref2"> [2] insert: </a> The IETF Source Address Validation Improvements (SAVI) Working Group is currently working on RFCs that specify a framework for source address validation. Once these RFCs are published, the NUD and DAD filtering references can be changed accordingly. insert: </p>

Requirements For for IPv6 in ICT Equipment
RIPE Documents Search