Fw: (IPng 7259) I-D ACTION:draft-ietf-ipngwg-jumbograms-00.txt

["Thomas Trede" <]

FYI.

Regards,
  Thomas Trede

-----Original Message-----
From: Internet-Drafts@localhost Internet-Drafts@localhost
To: "IETF-Announce:;;@sunroof.Eng.Sun.COM"@Eng.Sun.COM
<"IETF-Announce:;;@sunroof.Eng.Sun.COM"@Eng.Sun.COM>
Cc: ipng@localhost ipng@localhost
Date: Mittwoch, 3. Mdrz 1999 06:52
Subject: (IPng 7259) I-D ACTION:draft-ietf-ipngwg-jumbograms-00.txt


>A New Internet-Draft is available from the on-line Internet-Drafts
directories.
>This draft is a work item of the IPNG Working Group of the IETF.
>
> Title : IPv6 Jumbograms
> Author(s) : D. Borman, S. Deering, B. Hinden
> Filename : draft-ietf-ipngwg-jumbograms-00.txt
> Pages : 8
> Date : 01-Mar-99
>
>   A 'jumbogram' is an IPv6 packet containing a payload longer than
>   65,535 octets.  This document describes the IPv6 Jumbo Payload
>   option, which provides the means of specifying such large payload
>   lengths.  It also describes the changes needed to TCP and UDP to make
>   use of jumbograms.
>
>   Jumbograms are relevant only to IPv6 nodes that may be attached to
>   links with a link MTU greater than 65,575 octets, and need not be
>   implemented or understood by IPv6 nodes that do not support
>   attachment to links with such large MTUs.
>
>
>A URL for this Internet-Draft is:
>http://www.ietf.org/internet-drafts/draft-ietf-ipngwg-jumbograms-00.txt
>
>Internet-Drafts are also available by anonymous FTP. Login with the
username
>"anonymous" and a password of your e-mail address. After logging in,
>type "cd internet-drafts" and then
> "get draft-ietf-ipngwg-jumbograms-00.txt".
>
>A list of Internet-Drafts directories can be found in
>http://www.ietf.org/shadow.html
>or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
>
>
>Internet-Drafts can also be obtained by e-mail.
>
>Send a message to:
> mailserv@localhost.
>In the body type:
> "FILE /internet-drafts/draft-ietf-ipngwg-jumbograms-00.txt".
>
>NOTE: The mail server at ietf.org can return the document in
> MIME-encoded form by using the "mpack" utility.  To use this
> feature, insert the command "ENCODING mime" before the "FILE"
> command.  To decode the response(s), you will need "munpack" or
> a MIME-compliant mail reader.  Different MIME-compliant mail readers
> exhibit different behavior, especially when dealing with
> "multipart" MIME messages (i.e. documents which have been split
> up into multiple messages), so check your local documentation on
> how to manipulate these messages.
>
>
>Below is the data which will enable a MIME compliant mail reader
>implementation to automatically retrieve the ASCII version of the
>Internet-Draft.
>

<ftp://ftp/internet-drafts/draft-ietf-ipngwg-jumbograms-00.txt>