[atlas] [ripe.net #1087678] problem with connection to network

Hello and thanks for reply!

Now probe is work. I was read all FaQ, but nothing help.

The network is efficient for 100%.

Experiments help me. First i remove external memory, boot from built in, 
and then attach usb flash, after 10 mins probe connect to network.

27.05.2013 16:23, Alastair Strachan пишет:
> Hello,
>
> Thanks for your email and update.
>
> It would appear there is something on the network that is blocking the probe from connecting outside the network.
>
> If a probe has been assigned a Static IP and for some reason that is not reachable, the probe will automatically fall back to DHCP. As this is not happening, there must be something blocking it.
>
> The probe is currently configured via DHCP, again, this is not allowing the probe to connect outside your network.
>
> Please ensure port 443 is fully open and all firewall/security rules have been adjusted accordingly. Please take a look at our FAQ for more troubleshooting steps: https://atlas.ripe.net/about/faq/
>
> If you do have any further questions, please do not hesitate to contact us.
>
> Thank you for taking the time to host an Atlas probe.
>
> Kind Regards,
>
> Alastair Strachan
>
> RIPE Atlas Team
>
> ============================================================
Take the RIPE NCC Survey 2013 and tell the RIPE NCC what you think!
> Participants will be entered into prize draws to win an iPad.
> https://www.ripe.net/survey2013
=============================================================
>
>
>
>
>
> On Sun May 26 16:01:00 2013, sdimonius at gmail.com wrote:
>> Hello!
>>
>> I have problem with my probe v3 (ID 11003, FW 4520).
>>
>> First i used DHCP (at Home, for tests), all was worked fine.
>>
>> Then i reconfigure my probe to Static IP (by manual). Static IP
>> necessary to install my probe 24/7/365 in server room. We don't use DHCP.
>>
>> But probe can't connect to network...
>>
>> I brought probe to home, connect to DHCP network. Router give IP to
>> probe. But probe still disconnected on atlas.ripe.net at least 3 hours...
>>
>> LEDs:
>> 1 - ON
>> 2 - OFF
>> 3 - Slow blink
>> 4 - ON
>> 5 - ON
>>
>> Power reset - no result. Try to change Router cfg (ip, dns, mask) - no
>> result. Probe still disconnected.
>>
>> I read, that if set static IP - probe try to test setting.
>>
>> By LEDs - "Network test"? But 3+ hours "Network test"?
>>
>> DHCP work correctly (Router - Zyxell Keenetic, last firmware), PC work
>> without problems on full autoconfiguration (IP, mask, gateway, DNS)
>>
>> Can you help me?
>>
>> P.S. Sorry for my english, i'm from Ukraine
>>
>>
>>
>
>


-- 
С уважением, Дмитрий
Личный блог: www.weblance.com.ua
Хобби: www.mukachevo.net
Работа: www.dovgolit.com